I have just fitted a complete perfect conditon wiring harness to one of my st1100's and everything is working perfectly apart from the dammed neutral warning lamp!! an explanation follows ...
Neutral lamp works normally with the engine not running.
Side stand down, clutch in engine won't turn over (neutral lamp on)
Side stand up, clutch in engine turns over and starts (neutral lamp on)
Clutch in, put into gear (neutral lamp stays on but dulls very slightly)
Release the clutch in gear (neutral lamp goes off) but every time I pull the clutch in to change gear the neutral lamp comes on working off the clutch switch!!!!
I have tried bypassing the side stand switch but makes no difference to the neutral lamp just stops the engine turning over, anyone had the same sort of problem (the harness was identical to the one removed) is there a relay that could cause this fault because I used all relays that came with the harness off a donor bike untested) .... if so wich one is it cos they all look the same!
Neutral lamp works normally with the engine not running.
Side stand down, clutch in engine won't turn over (neutral lamp on)
Side stand up, clutch in engine turns over and starts (neutral lamp on)
Clutch in, put into gear (neutral lamp stays on but dulls very slightly)
Release the clutch in gear (neutral lamp goes off) but every time I pull the clutch in to change gear the neutral lamp comes on working off the clutch switch!!!!
I have tried bypassing the side stand switch but makes no difference to the neutral lamp just stops the engine turning over, anyone had the same sort of problem (the harness was identical to the one removed) is there a relay that could cause this fault because I used all relays that came with the harness off a donor bike untested) .... if so wich one is it cos they all look the same!