slipclutchms
Vendor
Update Alert!
Still working thru some website improvements but it is time to let it fly! If you navigate to the top of the page over the products drop down, you will see a section for the ST
I have several 1100 and 1300 standards ready to ship and the 1300Ps should be ready by Wednesday!
https://TransAlpADV.com/
Please use code 'stowners' at checkout for 10% off your order !
Thanks everyone!
Best,
Dylan Spink
Hello Everyone!
Quick introduction - My name is Dylan Spink, I am a motorcycle and machine tool addict. I have long been designing and making parts, mostly for my own addiction to long distance motorcycling. I rode an ST in a Butt Lite Rally, and rode the 17 and 19 IBRs on old Hondas. Professionally I am a Mechanical and Manufacturing Automation Engineer in the med device industry.
Currently I run my Engineering / CNC shop nights and weekends. I plan to offer a small catalog of awesome parts, and the first thing hot off the mill are these replacement MCL wings!
I reverse engineered a GEN 1 version, and suspect these will also fit GEN 2 mounts. I have a set off to a friend to confirm fitment and will update this post once I know for sure.
Any questions please don't hesitate to reach out - email is quickest but certainly will be checking back here as well. I welcome any feedback or ideas / suggestions for other parts as well!
Best,
Dylan Spink
Still working thru some website improvements but it is time to let it fly! If you navigate to the top of the page over the products drop down, you will see a section for the ST
I have several 1100 and 1300 standards ready to ship and the 1300Ps should be ready by Wednesday!
https://TransAlpADV.com/
Please use code 'stowners' at checkout for 10% off your order !
Thanks everyone!
Best,
Dylan Spink
Hello Everyone!
Quick introduction - My name is Dylan Spink, I am a motorcycle and machine tool addict. I have long been designing and making parts, mostly for my own addiction to long distance motorcycling. I rode an ST in a Butt Lite Rally, and rode the 17 and 19 IBRs on old Hondas. Professionally I am a Mechanical and Manufacturing Automation Engineer in the med device industry.
Currently I run my Engineering / CNC shop nights and weekends. I plan to offer a small catalog of awesome parts, and the first thing hot off the mill are these replacement MCL wings!
I reverse engineered a GEN 1 version, and suspect these will also fit GEN 2 mounts. I have a set off to a friend to confirm fitment and will update this post once I know for sure.
Any questions please don't hesitate to reach out - email is quickest but certainly will be checking back here as well. I welcome any feedback or ideas / suggestions for other parts as well!
Best,
Dylan Spink
Attachments
-
87.9 KB Views: 217
-
139.4 KB Views: 222
-
109.3 KB Views: 222
-
125.5 KB Views: 217
-
163.2 KB Views: 211
Last edited: