I've had my ST1300 for a couple weeks and doing a few mods I've seen on the forum. I'm about 10 years late to the party but wish I had bought this bike a long time ago, what a terrific bike.
This weekend's project was to install the LED bulbs in the mirror housing so I followed this thread best I could: https://www.st-owners.com/forums/threads/st1300-led-mirrors-now-you-get-noticed-with-style.96091/
I used yellow LEDs if that makes a difference and 270 ohm resistors in the following order:
GROUND - 270 ohm Resistor - NEG/POS - NEG/POS - NEG/POS - 12V Indicator Light Source
The bulb closest to the resistor is the only one that blinks or illuminates. Can anyone point me what I might've done wrong? Both sides do the same exact thing. The one light on each side is amazing, I love it so three must be incredible.
Thanks,
Jeff
This weekend's project was to install the LED bulbs in the mirror housing so I followed this thread best I could: https://www.st-owners.com/forums/threads/st1300-led-mirrors-now-you-get-noticed-with-style.96091/
I used yellow LEDs if that makes a difference and 270 ohm resistors in the following order:
GROUND - 270 ohm Resistor - NEG/POS - NEG/POS - NEG/POS - 12V Indicator Light Source
The bulb closest to the resistor is the only one that blinks or illuminates. Can anyone point me what I might've done wrong? Both sides do the same exact thing. The one light on each side is amazing, I love it so three must be incredible.
Thanks,
Jeff