Lower fairing rub marks

[Abogas]

Hi Folks.

I have a rub mark on my St1300 lower fairing where someone's boot has rubbed through the paint forward of the foot pegs. Having seen this on various ST1300's has anyone come up with a cunning way of concealing it or a tidy way of making it good? My thoughts are a sticker, Honda or otherwise?!

Thanks

Dave

 

[paulcb]

Like this?...

Frame Protector Set ST1300 | Bike-Quip

ST1300 Frame ProtectorsA full 1mm thickness (1000 microns) and designed to last!Practical & enhances the appearance of your bike.An incredibly popular accessory for the ST1300.STOP "boot scuffs" from spoiling your bike frame with these specifically contoured protectors.The kit comes complete...

www.st1300-accessories.co.uk

 

[Sadlsor]

Got a picture?
Having a hard time visualizing where you mean.
EDIT: these posts crossed on the Information superhighway.

 

[Jethro]

Paint protect / headlamp film by 3M.Smooze some at your local retailer,end cuts.Save yourself $50. DIY,in clear film.

 

[SMSW]

For what it's worth, my bike's PO was 6'3" and he had an aftermarket pair of highway pegs on the tip over bars. His pant leg had worn thru the black paint to the white primer(?) on both sides. I bought this 2010 in '13 and ordered a set of wind deflectors. That covered the wear marks. (Those wind deflector sets are no longer available except used.)

I think you meant your boot wore thru the paint on the frame, in which case @paulcb's post covers this problem.

 

[Abogas]

Sorry chaps, it’s about 4” below the removable cylinder head cut outs. Probably a case of a decent sticker or some film.

 

[Abogas]

On the fairing paintwork, not the frame!

 

[970mike]

These Honda knee pads may cover that https://www.oemmotorparts.com/oem5.asp?M=honda&T=st1300&Y=2006&L=ho-st13006&O=KNEE PAD SET&F=HO-ST1300A6-KY&L2=HO-ST1300A2-KY