Hey, what's wrong with the George Jetson sound of the stock exhaust? Now, if only my ST would turn into a briefcase when I park it...
It's unfortunate that so many on this site choose to criticize rather than answer a simple request but it's an older class of riders I suppose. Each to his/her own. Podium dismounted.
Thanks alot ;-) ... my cabin fever went way up after listening to the sound bytes!:
+1 on what he said.I happen to like a quite exhaust, and the catalyst makes it more eco-friendly. Enjoy the peace and quiet!
This is patently false! I don't like loud skirts.Some of you would like us all to have the same color bike and dress the same too.
Seems like saying you want a loud bike is akin to telling a new mother her baby is ugly.I'd say this thread does not display the SPIRT of the threads I normally read (and for which this site is noted). Dave has his answer thanks to a board member who elected to dig it up for him (that's what it's about). Maybe we should just move on... Bob
Good/nice way to put it Bob!I'd say this thread does not display the SPIRT of the threads I normally read (and for which this site is noted). Dave has his answer thanks to a board member who elected to dig it up for him (that's what it's about). Maybe we should just move on... Bob
Bob seems that some people just have a bad case of PMS. All should be fine in about 30-40 days.I'd say this thread does not display the SPIRT of the threads I normally read (and for which this site is noted). Dave has his answer thanks to a board member who elected to dig it up for him (that's what it's about). Maybe we should just move on... Bob
Come on down!Bob seems that some people just have a bad case of PMS. All should be fine in about 30-40 days.
Wishing I could ride.
Sure rub some more salt into the wound. LOLCome on down!
Maybe a little wet; but, I will not argue with a current temp of 57 under clear skies!
Mark
Oh... sorry about that a typo and I used the wrong word... it should have read "under cloudy skys"...Sure rub some more salt into the wound. LOL
Still snowing here in NYC right now
Pictures Please. I would like to see the finished product.hi you are not alone! here is how I did the job 'step 1),center punch 8 spots in the recessed portion of all 4 exaust in the center between the existing small exaust pipes and the outer rim of the recess they are centered in .2) drill 1/8 pilot holes in all center punched areas 3) drill 3/8 in. holes in all pilot holes all the way thru the pilots and the baffel wall behind them .4) using 1/8 carbide drimmel bit remove the remaining material in the outer holes out to the rim of the convex area and smoth out around the existing pipe.use a 5/16 stone on your drimmel to smoth up your job and finally finish up with a cratex polishing wheel all done. nice sound! your o2 sencer willtake care of the slight reduction of back preasure but my 1300 no longer sounds like a (singer)