I just noticed my motorized headlight adjuster is working but not changing the angle of the headlights. I removed the dash and upper cowl. How do I remove the motor from the back of the headlight.
The service manual says to
- Turn the aiming motor counterclockwise
- Turn the adjusting bolt counterclockwise and remove the aiming motor from the headlight unit
- Remove the gasket
- Install in reverse order
I cannot and do not want to brake the back of the headlight unit..
It sounds simple but....
The service manual says to
- Turn the aiming motor counterclockwise
- Turn the adjusting bolt counterclockwise and remove the aiming motor from the headlight unit
- Remove the gasket
- Install in reverse order
I cannot and do not want to brake the back of the headlight unit..
It sounds simple but....