Blrfl
Natural Rider Enhancement
Have the stored codes been cleared? (See post 18.) Unlike the ECM, once the ABS computer sees something, it doesn't let go of it until you flush it out.Ok Mark, your on deck
My parts arrive to him today, but he is still getting ONE long blink, followed by ELEVEN short blinks.
He said he has checked ALL fuses and connectors and has found no corrosion or damage.
What would you suggest next?
Check for metal shavings on the tone wheel and sensor.
Install the wheel, axle and stopper bolt.
Check that the tone wheel is aligned laterally with the sensor (should be if the wheel is on properly).
Check the clearance between the sensor and the tone wheel (0.7-1.2 mm or 0.03-0.05")
Clear the codes stored in the ABS computer.
Start, ride, see what it does.
--Mark