There are 2 hose sections spliced together (on picture you can see in the middle of the hose) and I used a copper tube maybe 3 inches long to join them as I had a radiator tube that was long with a couple of bends to it so cut what I needed to get it routed... The Zip tie around the nozzle I removed the Crash bar plastic cover, put the zip tie around the plastic, replace crash bar plastic.. And after removing the access panel where the upper part of the hose is, I zip tied it through the hole where the pin was.... Bring the Nozzle to the auto store to get a tight fit with the tube....NAPA part #9067. Also officer I only turn them on when I'm shining deer late at night.....
Last edited: