Hello folks. looking for some advise. i just finished replacing the timing belt on my 2002 ST1100. Bike was running fine prior to replacement. now i have to feed the throttle real slow to get it to higher RPM's. it Bogs if i give it too much throttle to quickly. it runs fine at higher RPM's. it also backfired through the carb a couple of times, which it never did before. im thinking the timing is off.
before i tear it all apart to check it, is there any way to verify proper timing by looking through the inspection holes? Also do these symptoms i described above, sound like a timing issue. i appreciate any advise.
before i tear it all apart to check it, is there any way to verify proper timing by looking through the inspection holes? Also do these symptoms i described above, sound like a timing issue. i appreciate any advise.