My 99 ST1100 has both low beams out (spontaneous simultaneous failure). High beams are functional.
Looking at wiring diagrams and reading threads has made the low beam headlight relay the prime suspect. I removed bodywork to access it (top cover, side panels) and can get my hand up in there but cannot get enough access to remove the relay. I also removed the triangle panel under the headlight to try from the bottom with no better success.
Is it necessary to remove the entire front end to get at the relays or am I missing a step?
Thanks in advance.
Looking at wiring diagrams and reading threads has made the low beam headlight relay the prime suspect. I removed bodywork to access it (top cover, side panels) and can get my hand up in there but cannot get enough access to remove the relay. I also removed the triangle panel under the headlight to try from the bottom with no better success.
Is it necessary to remove the entire front end to get at the relays or am I missing a step?
Thanks in advance.
Last edited: