ST1300 Rear Wheel / Flange Bearing?

Tankereng

Tankereng

Site Supporter
Joined
Mar 20, 2008
Messages
2,361
Age
49
Location
Colorado Springs
Bike
2018 Goldwing
STOC #
7405
Are the Driven Flange and the Wheel bearings themselves the same part number? Looked on Ron Ayers and they show different part numbers..

My Steed is quickly approaching 35,000 and I am considering changing all the bearings in the rear end.. I have a handfull of the 6905RS for the Driven Flange already...
 
Glad you got it figured out... I don't see the other bearings going out very often, in fact I don't remember hearing of those ever going out... I'd wait for 100k on those and just keep changing the flange ones out as needed.
 
Mellow said:
Glad you got it figured out... I don't see the other bearings going out very often, in fact I don't remember hearing of those ever going out... I'd wait for 100k on those and just keep changing the flange ones out as needed.
Click to expand...

:D:headbang:
 
Mellow said:
4 total

2 - 6905RS (91052-KZ4-J21)
1 - 6204UU (91052-MAE-004)
1 - 20X47X20.6 (91053-MN5-003)

In the diagram, 19, 20, 21

http://fiche.ronayers.com/Index.cfm...Model/ST1300A/GroupID/154989/Group/REAR_WHEEL
Click to expand...

I just had a new rear tire put on today and found out my flange bearing is shot. I'll replace all 4 of these mentioned above. Thanks for the All Balls referral Mellow as their prices beat OEMs a lot. I bought front bearings also and will do them with next front tire change. BTW, I saw your article on the flange bearing change, but did you do the other two at the same time? I didn't see any article with pics on those but guess it is very similar to the two (6905RS) bearings.

JDP
 
jdpfms said:
I just had a new rear tire put on today and found out my flange bearing is shot. I'll replace all 4 of these mentioned above. Thanks for the All Balls referral Mellow as their prices beat OEMs a lot. I bought front bearings also and will do them with next front tire change. BTW, I saw your article on the flange bearing change, but did you do the other two at the same time? I didn't see any article with pics on those but guess it is very similar to the two (6905RS) bearings.

JDP
Click to expand...

I only did the flange bearings... they seem to be the only ones that have an issue most of the time... I won't change the front or other rear bearings unless they feel notchy or... I may just change them all at 100k.
 
You must log in or register to reply here.
Back
Top Bottom