st1300 tank pad source?
- Thread starter stsurfer
- Start date
- Joined
- Feb 11, 2006
- Messages
- 9,678
- Location
- Jacksonville
- Bike
- GL1800 R1200RT NC700
- 2024 Miles
- 010688
- STOC #
- 6651
They can be ordered from any Honda parts supplier such as a dealer or online retailer like Cycle Parts Nation or Ron Ayers. I'd go to my local dealer with an online price and see if they will match it. Support your local dealer.
Left side is part number 17506-MCS-G01 but it's back ordered right now. Stock should replenish into Honda warehouses within 6 weeks.
Right side is p/n 17507-MCS-G01. It is available at present.
Both are about $20-$30 each depending on the source.
2006 Honda ST1300A A FUEL TANK | CyclePartsNation
Shop online for OEM FUEL TANK parts that fit your 2006 Honda ST1300A A, search all our OEM Parts or call at 269-385-1540
www.cyclepartsnation.com
2006 Honda ST1300A A FUEL TANK | Ron Ayers
Shop online for OEM FUEL TANK parts that fit your 2006 Honda ST1300A A, search all our OEM Parts or call at 252-758-3084
www.ronayers.com
Thank you!They can be ordered from any Honda parts supplier such as a dealer or online retailer like Cycle Parts Nation or Ron Ayers. I'd go to my local dealer with an online price and see if they will match it. Support your local dealer.
Left side is part number 17506-MCS-G01 but it's back ordered right now. Stock should replenish into Honda warehouses within 6 weeks.
Right side is p/n 17507-MCS-G01. It is available at present.
Both are about $20-$30 each depending on the source.
2006 Honda ST1300A A FUEL TANK | CyclePartsNation
Shop online for OEM FUEL TANK parts that fit your 2006 Honda ST1300A A, search all our OEM Parts or call at 269-385-1540
2006 Honda ST1300A A FUEL TANK | Ron Ayers
Shop online for OEM FUEL TANK parts that fit your 2006 Honda ST1300A A, search all our OEM Parts or call at 252-758-3084
Any specific product, thickness in mind?
sky.high
Site Supporter
Get some Seadek foam boat deck stuff, works fantastic 
I think the tech spec stuff is great:
HONDA ST1300 (2001 - CURRENT) Snake Skin Tank Grips
Precut kit includes left and right tank grips.
techspec-usa.com
this stuff looks interesting.... I'll check it out. Is it safe for the paint?
Yes, paint safe. We've been doing cooler toppers for the sign shop I work at
On my tank pad, I cut to shape I liked, then used a router table with ¼ round over bit, and rounded the edges