Just received my mirror deflectors and fairing side deflector kits. I went out this morning to install and found a slight problem with the instructions for installing the upper dashboard section (adjacent to the screen). The instructions say that you remove the existing clip and "save". You then install a "scrivit"in the place of the original clip. I have removed the clip, but all I have to install in its place is a screw which came with the kit, which must be the "scrivit"? The instructions are confusing as they show what appears to be the new screw and retainer. The instructions say "replace the existing screw with this scrivit". There are no original screws in place only clips (push/ pull type plastic rivits). I am now confused and have looked at removing the centre section from the original clips with a view to installing the "scrivit" or screw? Problem is I may damage the original clips as I cannot remove the centre section with reasonable force. Can someone who has installed these deflectors advise on what they did? Maybe I am missing a couple of "scrivit bodies".
Thanks in advance
Joe
P.S Any other pitfalls to be wary of during installation??
Thanks in advance
Joe
P.S Any other pitfalls to be wary of during installation??