Water pump gasket

Silver Bullit

Pearl Black
Joined
Jun 13, 2008
Messages
225
Location
Nj-Pa-NY
Bike
06 1300..Black
I am about to replace the gasket as i feel my leak is coming out the side on the right...So if there any thing else i should replace while i am in there ...I replaced the clamps with some really nice clamps so i am open to whats direction is best thanks...
 
Igor said:
You say your replacing your "water pump gasket"? May I ask why? If your getting leaks out the square hole, this indicates loose clamps up in the Vee (ask me how I know) LOL.
The only reason you'd want to replace the pump gasket is if you've had it removed or replaced.
May I suggest (4) breeze clamps on the water hoses, and (1) lg. breeze clamp on the t-stat housing cover.
Igo Far
Click to expand...


This is so true. When I rebuilt my Water Pump because it was leaking from the ROUND hole, I pinched the new Water Pump gasket. Boy did the water run out of the Square hole. I knew immediately what had happened. (This is for general info, If you have to replace the water pump cover gasket, the book say to use hondabond to seal the gasket to the cover. DO IT. It makes life much easier.)
 
Finally got around to ordering the gasket . the honda bond is proving to be very hard to get locally....Any help to get some thanks...
 
Shoot rulbe a PM. I'm guessing hondabond at honda or acura dealer would be the same thing.
There may be different types for different applications.
ex hondabond ht and hondabond type 4.
 
Well after digging a little further into this i am going to rebuild the pump do you guys know all that is needed....He sent me a pic of the pump and its leaking from the bottom . I may as well redo the complete unit..
 
Here is a list of parts you will need to rebuild the water pump.


Re: Another Coolant Leak Water Pump

https://www.st-owners.com/forums/show...mp#post1270059

Check out this Thread.

Re: Water Pump Weep Hole Leak. Here is a list of parts needed for this repair.

19217-mal-300 seal, mechanical
19210-mcs-000 impeller, water pump
19226-mcs-a10 gasket, water pump
91201-965-000 oil seal (12x22x5)
1394-mcs-000 gasket, Front Cover
96100-62003-00 bearing, (6200)
91301-MCF-000 O-ring (19. 9x3. 1)
I also replaced my Thermostat while I was in there.
19300-mbt-003 Thermostat
91361-sf4-951 O-ring (43.5x2)​
 
After talking with a honda mech, The mech seal and bearing along with oil seal . Stat and both orings. the shaft and the cover and the sprocket and chain is the only thing that you can reuse....I have a press so removing the bearing from the shaft is not a problem...I was also looking for some better hoses .....
 
After looking further into this issue i am having with this leak. The weep hole is clean no fluide is comimg from it. There is fluid coming from the smaller cover Should i do the complete job. I bought all the parts needed
 
Leak issue is all solved. I installed a new water pump gasket and cleaned up the bike in that area and i am happy with how it came out..
 
You must log in or register to reply here.
Back
Top Bottom