🤣 Funny!

Larry Fine said:
After having dug to a depth of 10 feet last year outside of Buffalo, New York scientists found traces of copper cable dating back 120 years. They came to the conclusion that their ancestors already had a telephone network more than 100 years ago.

Not to be outdone by the New Yorkers, in the weeks that followed, a Wheeling WV archaeologist dug to a depth of 20 feet somewhere just outside Woodsdale. Shortly after, a story in the The Intelligencer read, "WV archaeologists, reporting a finding of 200 year old copper cable, have concluded that their ancestors already had an advanced high-tech communications network a hundred years earlier than the New Yorkers."

One week later, a local newspaper in Barton Ohio reported the following: "After digging down about 30 feet deep in his pasture near the community of Hell’s Kitchen, Pete Riley, a hell of an engineer and a self-taught archaeologist reported that he found absolutely nothing.

"Riley has therefore concluded that 300 years ago, 'Ohio had already gone wireless.'"
Click to expand...
You have just defined the issues with most theses and doctoral papers.
 
Team2010 said:
1746988113686.png
Click to expand...
Depends...

while installing AC in residential homes and apartments, I came across some obviously shot-proved felines...
I mean the pneumatic SDS max hammer-drill roaring 2" holes through cast concrete walls, the Hilti shop-vac blaring aside, banging its filter cartridge every 60 seconds, and those kitties right in between, totally curious about the action, like... hey fellas, watcha doing there?... much to the astonishment of their owners... :unsure:
 
ST1100Y said:
... since the 70ies... :unsure:
Click to expand...
but we gave up years ago, so the "inching" part is actually past tense. Now we're permanently anchored to the Imperial system. After 2 liter soda bottles, and engine displacement in liters, we never got much further than dual-system labeling.
 
dwalby said:
but we gave up years ago, so the "inching" part is actually past tense. Now we're permanently anchored to the Imperial system. After 2 liter soda bottles, and engine displacement in liters, we never got much further than dual-system labeling.
Click to expand...
I worked in a machine shop. All our prints were inches and (metric). All the CNC machinery was Japanese.
 
dwalby said:
but we gave up years ago, so the "inching" part is actually past tense. Now we're permanently anchored to the Imperial system. After 2 liter soda bottles, and engine displacement in liters, we never got much further than dual-system labeling.
Click to expand...
Well, so you can buy 3 meters of 2x4...

While we have to get used to like 25 meter rolls of 1/4, 3/8, 1/2, 3/4 & 7/8 refrigeration copper...
 
ST1100Y said:
Well, so you can buy 3 meters of 2x4...

While we have to get used to like 25 meter rolls of 1/4, 3/8, 1/2, 3/4 & 7/8 refrigeration copper...
Click to expand...

And all of my socket wrenches and torque wrenches are imperial (1/4", 3/8", and 1/2" drive) regardless of whether the attached socket is imperial or metric.
 
Stu Padazole said:
I worked in a machine shop. All our prints were inches and (metric). All the CNC machinery was Japanese.
Click to expand...
Our school districts bought Chinese copies of Bridgeport mills for the high school metal shop.

Nice tools. They work well, though I'm confident they won't hold up anywhere near as long as the well used Bridgeports they replaced.

That said, all the scales and controls support imperial fractional / inches.

But the fasteners that hold the mill together are a Frankenstein's monster mix of metric and imperial!
 
STRider said:
Our school districts bought Chinese copies of Bridgeport mills for the high school metal shop.

Nice tools. They work well, though I'm confident they won't hold up anywhere near as long as the well used Bridgeports they replaced.

That said, all the scales and controls support imperial fractional / inches.

But the fasteners that hold the mill together are a Frankenstein's monster mix of metric and imperial!
Click to expand...
We had a British machine from the early seventies. All the nuts and bolts and tapped holes were British Whitworth.
 
cjames431 said:
I enjoy working on American-made cars because one never knows, is it metric or standard? Gotta keep em guessing and buying more tools. :rolleyes-2x::roflmao-2x:
Click to expand...
Yeah, the motorcycle workshop also moans about them HDs, as they too are always a surprise mixture of imperial and metric nuts'n'bolts... on the same vehicle... :cautious:
 
Way back when, working in Luxembourg, I had to do a test in a windtunnel which called for infrared radiation of so many Langley per minute. WTH ?? So I asked around & found an american colleague with an big book of tables and informed me that one Langley per minutes corresponds to such and such BTU per square foot.. Ok, so what the hell is a BTU, right ? So then I found a brittish colleague who said a BTU is so many Joules... Did some math and.... the test called for 1000 W/m2, basically full sunlight... What a journey...
 
You must log in or register to reply here.
Back
Top Bottom