The NT1100 Thread

:D You guys are discovering what I learned a few years ago. I can remember when a Honda 750 was considered a "big" motorcycle. It was the biggest baddest bike out there. We were all in awe of it. Now, it would be considered a beginner's bike.

Several of my cars have had less than 1500cc engines. My 66 VW Beetle had a 1300 cc engine with about 50 hp, and it took my wife and I up Pike's Peak. It turned over 100,000 miles that day. When you get a "car" engine in a motorcycle, it requires you have a beefier frame to carry it. That adds weight. The extra weight requires a beefier suspension...that adds weight. Because of the added weight, you now need more horsepower out of the engine. That'll probably add weight. As you add that weight, you need more gas to get the range you wanted. That adds weight. It's a vicious circle. Eventually, you end up with a heavy motorcycle that has power, but...

...and then you get a "middle weight" bike like the NT1100. It's bigger than that Honda 750. The NT1100 doesn't have the engine and horsepower that the big sports-tourers have, but...somehow it works. It isn't the fastest bike on the track...but it has more power than you'll ever use on the streets. :D And now the technology has come around to provide the aerodynamics, suspension, etc...that make it all work beautifully.

That's why the first thing on my criteria list is an engine less than 1000ccs.

Chris
 
That's why the first thing on my criteria list is an engine less than 1000ccs.

That's my point...the NT1100 is a winner.
Because I have seen the former statement from you quite a few times over the past several years the latter statement has made me curious enough to ask- At 1100cc, would the NT1100 be on your short list?

Your overall comments seem to indicate that you consider the package more than any one individual characteristic. I guess the real question is where is the line where a motorcycle crosses over from a mid-weight to a heavy-weight cruiser and would no longer be considered? I suspect that you would not consider it a simple matter of engine size but more a question of engine size in combination with weight. The reason I am curious is because you have become an avowed advocate of smaller/lighter motorcycles and have been convinced of their merits. As you have had several with many miles on them you have experience upon which to base an answer.
 
:D You guys are discovering what I learned a few years ago. I can remember when a Honda 750 was considered a "big" motorcycle. It was the biggest baddest bike out there. We were all in awe of it. Now, it would be considered a beginner's bike.

Several of my cars have had less than 1500cc engines. My 66 VW Beetle had a 1300 cc engine with about 50 hp, and it took my wife and I up Pike's Peak. It turned over 100,000 miles that day. When you get a "car" engine in a motorcycle, it requires you have a beefier frame to carry it. That adds weight. The extra weight requires a beefier suspension...that adds weight. Because of the added weight, you now need more horsepower out of the engine. That'll probably add weight. As you add that weight, you need more gas to get the range you wanted. That adds weight. It's a vicious circle. Eventually, you end up with a heavy motorcycle that has power, but...

...and then you get a "middle weight" bike like the NT1100. It's bigger than that Honda 750. The NT1100 doesn't have the engine and horsepower that the big sports-tourers have, but...somehow it works. It isn't the fastest bike on the track...but it has more power than you'll ever use on the streets. :D And now the technology has come around to provide the aerodynamics, suspension, etc...that make it all work beautifully.

That's why the first thing on my criteria list is an engine less than 1000ccs.

Chris
My V-Strom 650 fits this category very well. And I imagine that the V-Strom 800 even better.
 
Because I have seen the former statement from you quite a few times over the past several years the latter statement has made me curious enough to ask- At 1100cc, would the NT1100 be on your short list?
Yes it would and it was. I think I mentioned early on that the NT1100 was on my short list...but it wasn't available in the states till the last few months.

I'm not hard and fast on that criteria, but it is a start and helps narrow the choices down. My riding history started with small bikes and worked its way up, rather than like many on this forum where you rode much bigger faster bikes and as you age, you went down in size. That's happening at the same time as I age.

My Honda NT700VA fit the criteria perfectly. The later BMW F800GT did pretty good, but had a belt drive instead of a shaft drive. My current BMW F900XR has a chain. You can't win them all. :D

Your overall comments seem to indicate that you consider the package more than any one individual characteristic. I guess the real question is where is the line where a motorcycle crosses over from a mid-weight to a heavy-weight cruiser and would no longer be considered? I suspect that you would not consider it a simple matter of engine size but more a question of engine size in combination with weight. The reason I am curious is because you have become an avowed advocate of smaller/lighter motorcycles and have been convinced of their merits. As you have had several with many miles on them you have experience upon which to base an answer.
When I was coming up close to retirement, I bought a 2011 Honda NT700VA. It was drop-dead gorgeous in black. I was planning to take it on my post-retirement ride. Engine size less than 1000ccs. Full fairing even to include a lower fairing for the feet. It even had a shaft drive. It was made to be a sport-touring bike and eat away the miles.

Wet weight was 570 lbs. You've hopefully noticed some of the pictures I've taken on my rides. Well, more than once, I had passed on stopping to take a picture simply because I didn't want to manhandle the bike on the shoulder of the road. Long story short, I came across the BMW F800GT. Newer technology in that it had 50% more hp and weighed 100 lbs less.

I thought my Honda was really good at managing wind. It turned out the BMW was better. BMW must've spent time in a wind tunnel in its design. Even with things like freeway truck turbulence, it was noticeably smoother. I'd stick my hand down next to my leg and it was in calm smooth air. Yet if I moved my hand out an inch, it was in the full force of the wind. It moved the air enough...but not too much.

That made a difference in the fuel economy. Even though the F800GT had 50% more horsepower, it got incredible gas mileage. Average gas mileage was in the low to mid-50s. It was not unusual to hit the low to mid-60s though. With a 4 gallon gas tank that makes a huge difference in range. But even more so, it lessens the weight of the bike to not require more fuel to get acceptable range. Again, the vicious circle.

I take a lot of rides to Artist Point. It's a full day long ride. On my Honda NT700VA, I'd want a nap when I got home. On my first trip back with the BMW F800GT, I was about 45 minutes out from home and the thought of the nap came to mind. And then I realized I wasn't tired. In fact, when I got home, I mowed the lawn. That's a three hour long project. Two if I do a minimum job. The only difference was the bike and the bike made a huge difference in just how tired I was. The Honda NT700VA was good...but the lighter F800GT was better.

When I set out on my epic post-retirement ride, I told my wife that I might get back and decide I wanted something bigger. It turned out that never once on that ride did I find the smaller package of the F800GT to be lacking. Cruise control was the only thing I thought of, and I was quite happy with a throttle lock.

One more quick story...

Pre-COVID I was invited to join up with a group of Canadian riders. To them, Washington state was a speed bump to get out of the way as they headed to back roads in Northern California and Oregon. They were predominately riding Kawasaki C14s with a BMW K1600 and a ST1300 in the mix. All were remapped and I'd guess they were putting out around 160 hp to the rear wheel. The first day, I was having problems keeping up. My riding style is smoother and less intense. By the third day, it was no problem at all. They rode extremely fast till about 10 am in the morning. Then they slowed down to where I could let them get way out ahead of me while I slowed to take in the scenery...and then I'd "reel them in". No real effort. Their bikes were fast...but heavy. And that weight took its toll as the ride went on. They could go faster in a straight line, but we were riding some of the twistiest roads I've seen. The weight was a handicap. And like on my trip above to Artist Point, I found I could keep that pace up all day long whereas they were beat.

The NT1100 is a good direction for Honda...and anyone who buys one. The engine is big enough to do all you could want safely on the public roads. It'll carry two easily, or one with bags easily. The comfort is there. The handling isn't up to sport bike level, but do you really want that? It's perfect for sport-touring...or even just commuting back and forth each day. As you pointed out Andrew, it isn't just one item...but it is the sum of the whole bike that makes it as good as it is.

Chris
 
Last edited:
I guess the real question is where is the line where a motorcycle crosses over from a mid-weight to a heavy-weight cruiser and would no longer be considered?
I'm not sure I want to try to fit in an answer to that in an already long post. So here goes...

Like I wrote above, I started small. A Suzuki 2-stroke 90cc bike of unknown model in England back in the 80s. A much more refined Honda twin after that. Then a couple of Suzuki Burgman 400 scooters for commuting and day trips. Then the Honda NT700VA. Somewhere along the line you get to the bike size that does what you want it to do. Like in my case, commuting around town, long day trips, and some cross-country touring. Edward Otto took a 250cc Honda Helix scooter on an Iron Butt Rally ride. Engine size is not the sole determining fact. When you find that sweet spot, stick with it.

I had always dreamed of owning an FJR. The magazine writers said all the others were great, but the FJR was just a bit better, or so they said. I've sat on one once. I doubt I'll ever ride one. I have no interest now. Age has a way of knocking some sense into my skull. The figures vary, but an FJR weighs about 660 lbs. That's about 175 lbs more than I want to deal with.

I pulled into Costco yesterday and parked in a spot with a slight downhill slope. It was no big deal to simply grab my XR (less than 500lbs) and move it backwards. Even if the parking spot had a steeper downhill slope, it isn't a big deal to move. Somehow I don't see me doing that with a bike that weighs 175 lbs more.

If I was 15-20 years younger, I'd consider a heavier bike. But age has a tendency to make us face reality and I've found lighter bikes really do just fine. ;) :)

Chris
 
Last edited:
age has a tendency to make us face reality
My age reality (71) is knowing what I want in a bike. More fun, less fatigue and short recovery time. Big easy cubes, comfort, handling. The DCT and cruise are a joy for recovery. In terms of fatigue, nimble handling cancels any imagined weight penalty at 546 lb - talk about making a mountain out of a mole hill.
 
Last edited:
@billo I seem to have offended you, and for whatever I said, wrote or did, I'm sorry.

As I wrote when I replied to Andrew, the NT1100 was on my short list for a new motorcycle. I love the styling. My biggest regret was when I was looking for a replacement for my F800GT, it wasn't available. The Suzuki model that's similar in spec to the NT1100 wasn't either. It was going to come out 6 or 8 months later than what I needed. That's just the way life works and I moved on to what was available.

As far as the NT1100 being 46 lbs heavier than my 500 lb criteria is, well just like I wrote about the chain drive on the bike I did get, "You can win them all." It's close though and that's what counted in my eyes.

The only thing I believe I'm guilty of is wondering why it took many of you so long to figure out how wonderful this segment of bike is. They are light, fast and bring a smile to the face when ridden.

And when you park it and walk away, you turn around for one more look because it is so easy on the eyes.

Chris
 
You prefer a lighter bike. Fantastic! :):)
I do wonder how a BMW owner on a Honda sub forum, Nt1100 sub thread can comment on a bike he’s never ridden or assume it’s a segment new to owners here.
 
Got my bike back yesterday from Sargent Cycle Products. First NT1100 seat using my bike for R & D. The OEM seat is plenty good for me and had no cause for immediate replacement. However I did want a heated seat and the only way to get it was let them prototype a seat. I’m trusting that the seat is as good as other Sargents seats I’ve had in the past because I’m gonna get on it Tuesday morning and ride to Arkansas.IMG_5754.jpegIMG_5758.jpeg
 
Last edited:
I just scored the China made knockoffs of the Hepco-Becker crash bars. A guy posted on the FB NT1100 group that he had a set that he was giving away for the price of postage. 20 bucks. He acquired them in a raffle of sorts and does not have a NT1100. I went to Hepco- Becker site and printed out there instructions of how to install. We will see how well they correspond.
Going to install them or attempt to install them tomorrow afternoon. If I get them to fit I will post some pictures and detail any issues I had.

1757799150182.png
 
I finished installing the Hepco-Becker Chinese Knock Off bars on the bike. For 20 bucks I cannot complain, however there are a couple of issues I will mention. Bars fit well but needed to finagle them in position. Even the real Hepco-Becker instruction that I had printed off of their web-site left a bit to desire. Hardware is chrome / silver not black so visually it sticks out like a sore thumb. (I will either replace with black hardware or paint them black. Missing the 6 little plastic plugs that fit into the mounting holes for fog lights. Two areas that were a real PITA to install, was the nut that went on to the long mounting bolt thru the frame. No room to get fingers into space. Had to use an open end wrench with tape to hold the nut in place and then at the same time reach around the and ratchet the bolt. All this by feel. Could not see. Also very limited space for the tools. See circled item in attached picture. Second item of frustration was the two small bolts and nuts that secured the two have of the bars together. The bolt head was to be facing outward and the nuts secured from the back side of the bar. imposable to get my finger in the space to hold nut and washer and make sure bolt did not fall out of hole. Solution was to install in reverse so the nuts were facing out. See circled item in enclosed picture. I believe one would still have this aggravation even with the real Hepco-Becker bars. This item would have been much easer with four hands, rather than just two. Of course having the bike on a lift sure did make it a bit easer on the old body. All in all not bad for 20 bucks.

1757799389739.png

1757799432159.png
 
I don't know if they make them for the NT1100, but I can't imagine them not. Heed makes crash bars that are excellent. A bit more expensive though that $20. ;)

It depends on your taste too, but I was looking for crash bars that protected the expensive fairing pieces. Most of those sold for my bike "protected" the engine...and cost just as much as the Heed crash bars that go up enough to protect the fairing too. They are worth looking into. The fit was perfect. The cost about the same as the minimalist crash bars. And they blend into the lines of the bike such that I don't even notice them. And if you're looking for a place to mount auxiliary lights, they work great for that.

Heed is based out of Poland, but that wasn't an issue at all. Shipping was fast. I bought them for my first XR, and after that was totaled, I bought them for the current XR with no hesitation.

Just a recommendation that might help you...

Chris
 
Another SaddleSore 1000 in the books. The Sargent seat is great but today convinced me the bars need to be 25-30 mm closer. Not higher but moved back closer to take advantage of the flatter, more generous seating area of the Sargent. I left Jacksonville at 4:00 AM Eastern and stopped riding at 8:30 PM in Arkadelphia, AR. The NT1100 can lay down the miles.
 

Attachments

  • IMG_5778.jpeg
    IMG_5778.jpeg
    103.9 KB · Views: 12
  • IMG_5777.jpeg
    IMG_5777.jpeg
    149.3 KB · Views: 12
  • IMG_5760.jpeg
    IMG_5760.jpeg
    116.5 KB · Views: 12
The NT1100 can lay down the miles.
That's what I've found with the "lighter" bikes. :) The NT1100 isn't "light" if you look at motorcycling over the last 50 years or so, but it is by today's standard. And it isn't super powerful if you look at the flagship bikes...but it is by what we used to consider "big" bikes. That's not saying there's anything wrong with the NT1100, only that it is a bike that makes sense. And maybe the manufacturers are missing what makes sense in the chase after "bigger is better". It's like Honda gave us something that is a perfect blend of comfort, power, economy, ergonomics...and let us jump off the band wagon of more is what you gotta have.

I'm not going to do another SS1000. I did it on a 34 hp scooter, so to me there's nothing to be gained by doing it again. (Besides, it doesn't get me a discount on my coffee at Starbucks if I tell them I did a SS1000. :D ) But I just came back from an all day trip on a similar bike and never once thought I was missing something.

IMO, you guys with the NT1100s have found a beautiful bike that will do it all.

Congratulations on the SS1000!

Chris
 
Back
Top Bottom