2007 ST1300 Seat refurbish?

Thanks. I was thinking about a cushion for the seat before I jump into a replacement seat. Do you have any suggestions other than the bead type?
Only maybe an air cushion. I used one for awhile, worked really well - until it sprung a leak (really).
 
One of the members, BigT, has an as new OEM seat for sale, just saw it, if interested.
 
Sargent can also rebuild your stock seat. Just a short hop for you down to Jacksonville, FL. I had them rebuild a Corbin for a K100RS once and it was a great seat. Used it on two different KRS's over 200K.
Just a thought.
 
I had brought an airhawk didn’t like it, I had cut down the factory seat along time ago but it was getting hard ( it’s a 2003 from the old bike ) took the seat cover off again shaved it down some more and picked up a honeycomb motorcycle cushion ( 30 bucks vs 100 for airhawk ) a week ride to Michigan and back no problem.
 

Attachments

  • image.jpg
    image.jpg
    129.6 KB · Views: 8
Well, I took a short ride (130 miles) broken up by biscuits and gravy at Rhett's Place just north of Frankfort KY. I didn't inflate the seat anywhere near full and actually took a bit more pressure off on the ride home. It's an improvement. Good ride. Biscuits and gravy was pretty good too.
 
Back
Top Bottom