coffee (n.)
survival juice...

G'Day...
2°/5°C, gray, gray, and some more gray... slight chances precipitation... (great, and I just washed the car this weekend...pfffff...)
home and office coffee charge absorbed...
moderate busy w/e, some progress on the NT700...
ze GF volunteered to remove broken bits (besides the physical therapy also a bit of a "strafing" for wrecking it...
)
even used the shop-vac to remove dried up tufts of grass, soil and pebbles from pretty much everywhere in there...
Meanwhile I plastic-welded and epoxy-ed various items like the belly pan/engine spoiler back in shape...
Further got the mangled cowl stay off and the replacement installed, clips and harness back on, fixed the transport damaged donor headlight
also obtained at eBay (two prongs got smashed in transit) with some special cement (worked flawless!), and installed that with new bulbs while at it...
Then swapped the clocks/PCB from her smashed casing into the base and glass from a used donor instrument cluster;
worked clean and sterile, so not a spec of dust inside, also cleaned the "new" glass with aviation grade acrylic solvent/preserver and
special, lint free rags... installed, tested, all working flawless...
Found starting seepage the thermostat housing (pink/reddish crystals) so ordered a new rubber ring/gasket to replace that
while we've all open anyway...
today office again... dull... but pays the bills... so... eyes closed and go for it...
Enjoy the start into another week...
survival juice...


G'Day...
2°/5°C, gray, gray, and some more gray... slight chances precipitation... (great, and I just washed the car this weekend...pfffff...)
home and office coffee charge absorbed...
moderate busy w/e, some progress on the NT700...
ze GF volunteered to remove broken bits (besides the physical therapy also a bit of a "strafing" for wrecking it...
even used the shop-vac to remove dried up tufts of grass, soil and pebbles from pretty much everywhere in there...
Meanwhile I plastic-welded and epoxy-ed various items like the belly pan/engine spoiler back in shape...
Further got the mangled cowl stay off and the replacement installed, clips and harness back on, fixed the transport damaged donor headlight
also obtained at eBay (two prongs got smashed in transit) with some special cement (worked flawless!), and installed that with new bulbs while at it...
Then swapped the clocks/PCB from her smashed casing into the base and glass from a used donor instrument cluster;
worked clean and sterile, so not a spec of dust inside, also cleaned the "new" glass with aviation grade acrylic solvent/preserver and
special, lint free rags... installed, tested, all working flawless...
Found starting seepage the thermostat housing (pink/reddish crystals) so ordered a new rubber ring/gasket to replace that
while we've all open anyway...
today office again... dull... but pays the bills... so... eyes closed and go for it...
Enjoy the start into another week...


, have a great day on the roads! 

