Anyone interested in these products?

jodog

jodog

Joined
Jan 27, 2012
Messages
104
Location
Minnesota
Bike
12 ST 1300; 20 Wing
2026 Miles
022593
I just received my Aux Fuel cell for my wing from Lincoln Seals and it's really high quality work. Based on the Firecreek design but made from aluminum rather than stainless it's a work of art. He's looking to expand his fabrication products and I suggested that the ST crowd is always trying to locate farkles that were made in the past but no longer available. He's open to the idea but is wondering if there is any market.

Would anyone here be interested in new items like these below? If we made a group buy he'd be up to making them. I'm sure he would also be willing to make an ST specific Fuel cell but there's probably less demand for that.

Discuss.

IMG_0539.jpegIMG_0540.jpeg
 
I made one of the ram ball mounts like the one here but only 2 balls... Got the idea from here and I love it. What are the 2 other do hickeys? If he's going to make something for the ST1300 crowd, highway pegs! Need those! I would like to have a set like the psrs but I have to wait to order and $350 a set? I wouldn't mind paying that but I don't want to have to wait several months for it. I am looking for a way to put some highway pegs on my St, I'm going with an idea I found on here and putting two generic pegs on a bracket mounted to the crash bars, but I would love a set of the PSR highway blades
 
Oh ok. I'd love a set of those as I build my St to a proper touring machine... I think a fuel tank that mounts to the givi plate and have attachment points for soft luggage will be great! I can keep my second seat and have a second fuel cell that can act as a luggage rack as well....!
 
LAron said:
I am interested in two sets of the under mirror light brackets but only if they are metal.
Click to expand...
They would be aluminum. I would send mine to him as examples and he'd create them, so some amount of lead time.
 
Ajcole85 said:
I made one of the ram ball mounts like the one here but only 2 balls... Got the idea from here and I love it. What are the 2 other do hickeys? If he's going to make something for the ST1300 crowd, highway pegs! Need those! I would like to have a set like the psrs but I have to wait to order and $350 a set? I wouldn't mind paying that but I don't want to have to wait several months for it. I am looking for a way to put some highway pegs on my St, I'm going with an idea I found on here and putting two generic pegs on a bracket mounted to the crash bars, but I would love a set of theR
Click to expand...
Hi way pegs are very easy to mount, using the existing tipover bars and inexpensive hiway pegs. I have ridden several thousand miles with pegs I mounted myself with ease, which gives me a second leg position for comfort. It is really quite easy to do, and hundreds of $ less than $350.
 
@jodog
It's been a long while since we spoke but if I remember correctly, you had a reserve fuel cell made to fit in place of your passenger seat and it had a pump to refuel your upper tank while still on the go.... Any chance we can get this gentleman to create something similar that mounts to the givi top box plate? With maybe an option with a back rest or screw holes to put a back rest... Just a thought....

I made this backrest with shelf for my wife since I didn't have time to order a topbox or the funds at the time(this was cheaper), it's made with steel... I don't have much experience with aluminum fab but I guess I could try something about the same dimensions but about 2 1/2 to 3 inches tall or somewhere in that vicinity... I do have a question, how are you able to plumb it into your upper tank?

Look forward to your reply thank you 😋
 

Attachments

  • IMG_20240807_180114631_HDR.jpg
    IMG_20240807_180114631_HDR.jpg
    124.9 KB · Views: 29
Ajcole85 said:
@jodog
It's been a long while since we spoke but if I remember correctly, you had a reserve fuel cell made to fit in place of your passenger seat and it had a pump to refuel your upper tank while still on the go.... Any chance we can get this gentleman to create something similar that mounts to the givi top box plate? With maybe an option with a back rest or screw holes to put a back rest... Just a thought....

I made this backrest with shelf for my wife since I didn't have time to order a topbox or the funds at the time(this was cheaper), it's made with steel... I don't have much experience with aluminum fab but I guess I could try something about the same dimensions but about 2 1/2 to 3 inches tall or somewhere in that vicinity... I do have a question, how are you able to plumb it into your upper tank?

Look forward to your reply thank you 😋
Click to expand...

Not exactly. Here you see two fuel cells, a pelican case, and my custom pillion seat replacement part. The seat replacement (with the bear claw sticker) bolts to the bike and the top deck is hinged to open what I call the "tool box" where I keep air pump, tire repair, tool kit, spare battery (yes), jump pack, duct tape, etc. Bolted to the top of that is a 3.8 gal fuel cell. Rearward I have a givi mounting bracket with another 3.8 gallon fuel cell mounted onto and the Pelican on top of that.

Each fuel cell has a 5/16 line running to a shut off valve (other side of bike). After the shut offs the lines merge and go into an electric fuel pump designed for a big block chevy (I don't like waiting a long time for a refill). You could use the same pump as the bike uses and thus always have a spare with you. The pump is mounted under the tool box. From there the 5/16 fuel line runs to the inspection bolt atop the lower fuel tank. Nice of honda to provide a threaded inlet.

When the fuel guage is down to 3 bars I open one valve and start the pump. The pump pushes about a gallon a minute into the bike tank. Must remember to turn the pump off and close the valve. Later repeat the procedure with the second tank when back down to 3 bars.

Depending on conditions I can run about 500 miles without putting a foot on the ground.

1775135570338.jpeg
 
jodog said:
Not exactly. Here you see two fuel cells, a pelican case, and my custom pillion seat replacement part. The seat replacement (with the bear claw sticker) bolts to the bike and the top deck is hinged to open what I call the "tool box" where I keep air pump, tire repair, tool kit, spare battery (yes), jump pack, duct tape, etc. Bolted to the top of that is a 3.8 gal fuel cell. Rearward I have a givi mounting bracket with another 3.8 gallon fuel cell mounted onto and the Pelican on top of that.

Each fuel cell has a 5/16 line running to a shut off valve (other side of bike). After the shut offs the lines merge and go into an electric fuel pump designed for a big block chevy (I don't like waiting a long time for a refill). You could use the same pump as the bike uses and thus always have a spare with you. The pump is mounted under the tool box. From there the 5/16 fuel line runs to the inspection bolt atop the lower fuel tank. Nice of honda to provide a threaded inlet.

When the fuel guage is down to 3 bars I open one valve and start the pump. The pump pushes about a gallon a minute into the bike tank. Must remember to turn the pump off and close the valve. Later repeat the procedure with the second tank when back down to 3 bars.

Depending on conditions I can run about 500 miles without putting a foot on the ground.

1775135570338.jpeg
Click to expand...
That's awesome. Thanks for the reply. Any chance you can upload a few pictures of your custom replacement part for the pillion...? And a few pictures of how you have the second tank on the givi mount and your hose routing? Im trying to come up with a way to have a fuel cell on my givi plate and run wires and hose to fuel tank with on/off switch location.... And how to wire the fuel pump... With relay or without or just fused with on/off switch. I have a thunder box that protects my electrical and can run a pump power line off that.... And if you have any suggestions on how to do something better, I am open to advice. I'm also trying to picture your toolbox, is there any chance you could send pictures of how you have that fabricated. Because at this point if I'm going to be a single Rider I might build a box or fuel cell that covers the Gibby plate and the rear seat at the same time so it gives me a spot to mount a backrest similar to what you have on one of your two cells
 
Magicman said:
Hi way pegs are very easy to mount, using the existing tipover bars and inexpensive hiway pegs. I have ridden several thousand miles with pegs I mounted myself with ease, which gives me a second leg position for comfort. It is really quite easy to do, and hundreds of $ less than $350.
Click to expand...
Got pics? What pegs did you go with?
 
I used XMFT pegs from Amazon. Just had to reduce the mounting bracket size to fit the existing bars. I cut some pvc tubing in half as a spacer and it works fine. Sorry for the delayed response!!
 
And of course you also have to cut/trim the tip over bar covers.
 
Pics!
 

Attachments

  • 20260608_180904.jpg
    20260608_180904.jpg
    228.2 KB · Views: 20
  • 20260608_180857.jpg
    20260608_180857.jpg
    162.9 KB · Views: 20
That looks like it would be pretty comfortable for those of us with long legs. I'm curious to see what the actual mounting looks like underneath the tip over bar covers...
 
I'm on a road trip right now, but as I said I used pvc pipe as a spacer for each, and I used a hose clamp on each bar to keep them from sliding forward.
 
The hose clamp is on the bar itself, just in front of the pegs mounting clamp.
 
You must log in or register to reply here.
Back
Top Bottom