Best aftermarket heated grips for 30 st1300.

ST1100Y · 2026-11-13T02:54:53-0600

Well...
the Koso Apollo list a length of 130mm...
the Oxford OTOH a length of 120mm...
whilst the OEM h/handles (on the ST1100) are 124mm...

so either live with a gap towards the end-weights, or a stuck throttle...

Billy Collins · 2026-11-13T12:22:24-0600

Josh_ST said:
I'll echo the Koso grips, they work great for me. Been installed for 3 years. Only fault is operator error, I occasionally turn them on when I honk the horn due to proximity.

Hey Josh, what mm length fits best ( especially on the right hand side) 120mm or 130mm? I had my choice narrowed down to these or the oxfords. I kinda like the all in one fit of the Koso vs the external controller with the oxford.

RaYzerman · 2026-11-13T18:11:33-0600

My review of Oxords..... they get extremely hot if left on High for too long, will melt their inner tube, and short out, plus will deform if you put anything over them such as Grip Puppies..... DAMHIK. The answer, limit their time on High.......

Also, they have an integrated controller version called PRO, and there is also a narrow controller for mounting on handlebars (if you have room). Additional there is a version called ADVANCED Integrated, which includes that handlebar mounted controller....... available in 3 different lengths (Adventure, Sport, and Touring). These are a little more spendy than the traditional versions........

Oxford HotGrips Pro 2.0

The Oxford Hot Grips Pro® 2.0 represents the next evolution in heated grip technology, delivering superior performance with a fully integrated design and two additional heat settings for extreme winter temperatures. As Oxford‘s most advanced HotGrips® system, the pro 2.0 sets the benchmark for...

www.oxfordproducts.com