Bike-Quip Screen Mech Repair Kits - now available

Steviebilbo

Steviebilbo

Vendor
Joined
Apr 26, 2017
Messages
3
Age
67
Location
Dorset, UK
Bike
ST1300 ABS 2010
Folks, this is a copy of the latest message just posted today (Wednesday 26 Oct ) on several Facebook pages.

I have now made the product page for the kits available to all. I am only selling mail order at the moment - if you want the kit fitting, **it will be another couple of weeks before I can offer that service. If you are one of my crowd-funders, drop me a note with your order and I will check and then refund you the discount.
https://www.st1300-accessories.co.uk/.../screen-mech...

Edit ... **(Actually, if you also want new slider blocks too, then I can fit them to the cables for you before shipping n I will waiver the charge.)


So the project has finally come to fruition - I have sent some kits stateside already to some of my early bird crowd-funders and shipping comes in at £21 for tracked insured shipping. If you add the slider blocks, it shouldn't make a difference to the shipping neither. As the page says, you WILL need access to a crimping tool (ferrule crimper) to fit these to your own slider blocks (Dogs).

Just by way of acknowledgement, another big thanks to Rick of Carler Motor Cycle Parts for graciously allowing me to use his strip down and clean/lube documents on my site too.

Any question, please drop me a message on the site or an email to bikequipsteve@gmail.com as I don't visit this site that often ... 'specially when I'm this busy!

Cheers, Ride Safe!

Steve B
 
Last edited:
Steviebilbo said:
...
I have now made the product page for the kits available to all. I am only selling mail order at the moment - if you want the kit fitting, **it will be another couple of weeks before I can offer that service. If you are one of my crowd-funders, drop me a note with your order and I will check and then refund you the discount.
https://www.st1300-accessories.co.uk/.../screen-mech...
...
Click to expand...

I just received the Bike Quip cables and gear, and plan to repair one of my windshield mechanisms with them for my 2004 that I'm putting back together.

I'll let you know how it goes!
 
SupraSabre said:
I just received the Bike Quip cables and gear, and plan to repair one of my windshield mechanisms with them for my 2004 that I'm putting back together.

I'll let you know how it goes!
Click to expand...
Yes, please! Lots of photos too. Show us the kit please.
 
there is a good photo at this link,,, CAt'

www.st1300-accessories.co.uk

Screen Mech Repair Kit | Bike-Quip

PLEASE - READ all of this BEFORE asking questions or making your order You Will Need A Ferrule Compression Tool (Crimper) to fit these yourself! I have created this kit to address the problem with the OEM gear and cables used in the screen height adjusting mechanism. More detail of the problem...
www.st1300-accessories.co.uk www.st1300-accessories.co.uk
 
Although the picture of the kit shows the kit, it doesn't show you the difference between the gears and the cables! In the description of his kits, Steve explains that they are NOT interchangeable. Once I looked at the differences, I can see why! On that note, I think Steve has a MUCH BETTER product, than the original gear and cables.

The kit:

20221108_ReplacementParts.jpg

The gear difference: (Bike Quip on the right, the other gear is one that was made by a member on the forum, but I can't remember his name.

20221108_GearDifference.jpg

The original gear and the other two: Original eaten up on the left, the one made by a member (middle) and the Bike Quip (right).

20221108_ThreeGears.jpg

Cable difference:

20221108_CableDifference.jpg

Original on left, Bike Quip on right. Talk about a difference!

The teeth of the Bike Quip Gear mesh with the windings. It will be interesting to see how well it will work!

I've torn down one of my broken (I have about 6) windshield mechanism units, so I'm cleaning it up, before I reassemble it.

I'll provide more pictures as I go!
 
SupraSabre said:
I've torn down one of my broken (I have about 6) windshield mechanism units, so I'm cleaning it up, before I reassemble it.

I'll provide more pictures as I go!
Click to expand...

So the point is you're really hard on windshield mechanisms, Bob? :)

Thanks for the pictures!
 
Ordered and received my kit as well. Now I just need time to install it.
Kit looks very robust and hopefully it provides a lifetime of service!
 
Esti1300 said:
@Steviebilbo, what is your shipping cost to Canada for this kit?
Click to expand...
If you go to the Bike Quip website and add whatever you are buying to your cart then you can check the cost of shipping. There is a conversion calculator there as well.
www.st1300-accessories.co.uk

Screen Mech Repair Kit | Bike-Quip

PLEASE - READ all of this BEFORE asking questions or making your order You Will Need A Ferrule Compression Tool (Crimper) to fit these yourself! I have created this kit to address the problem with the OEM gear and cables used in the screen height adjusting mechanism. More detail of the problem...
www.st1300-accessories.co.uk www.st1300-accessories.co.uk
 
RiderRon said:
If you go to the Bike Quip website and add whatever you are buying to your cart then you can check the cost of shipping. There is a conversion calculator there as well.
www.st1300-accessories.co.uk

Screen Mech Repair Kit | Bike-Quip

PLEASE - READ all of this BEFORE asking questions or making your order You Will Need A Ferrule Compression Tool (Crimper) to fit these yourself! I have created this kit to address the problem with the OEM gear and cables used in the screen height adjusting mechanism. More detail of the problem...
www.st1300-accessories.co.uk www.st1300-accessories.co.uk
Click to expand...
Yep. Got it @RiderRon. Just trying to get the vendor here to publish his shipping rate for the Canadian market (like he did for the US market) on this forum and save some folks a step as they make their decisions. ;)
 
SupraSabre said:
Nope, I bought those with the idea of fixing them.

We'll see what happens.

20221108_spareparts.jpg

20221108_moreParts.jpg

20221108_moreUnits.jpg

Like I said....
Click to expand...

Yeah, when Bob stopped cleaning out ebay the market price came down, or at least the cheap ones weren’t getting snapped up so fast.
Then I started buying them.
I have 3 working spares and a non working parts unit.
BTW I never adjust the wind shield height over 80 mph. Almost never.
 
Esti1300 said:
Yep. Got it @RiderRon. Just trying to get the vendor here to publish his shipping rate for the Canadian market (like he did for the US market) on this forum and save some folks a step as they make their decisions. ;)
Click to expand...
Sorry this is a late reply but I don't visit this site too often (as stated .. a little busy!) I tend not to display postal charges as they can change based on service chosen and additional items in the cart will affect the price too. Canada and USA are pretty much identical (for all weights and items) but I can't send tracked AND signed to Canada - one or the other so I prefer tracked shipping.
Cheers, Ride Safe!

Steve B
 
Steviebilbo said:
Sorry this is a late reply but I don't visit this site too often (as stated .. a little busy!) I tend not to display postal charges as they can change based on service chosen and additional items in the cart will affect the price too. Canada and USA are pretty much identical (for all weights and items) but I can't send tracked AND signed to Canada - one or the other so I prefer tracked shipping.
Cheers, Ride Safe!

Steve B
Click to expand...
Interesting… Thanks Steve!
 
I just ordered my second repair kit from Steve. I figured might as well have one in the parts bin incase the 2010 or 2012's windshield mechanism goes bad on me.
 
You must log in or register to reply here.
Back
Top Bottom