how did it go?Im finna change my oil to the Delo stuff but all I'm finding is the 400 SDE. is there much of a difference over the 400LE?
how did it go?Im finna change my oil to the Delo stuff but all I'm finding is the 400 SDE. is there much of a difference over the 400LE?
how did it go?
You know that's from a year ago?
Or maybe you're that bored? : )
PHYSICAL TESTS (click for test details) - a | Standard | Chevron Delo 400 SDE |
TBN, mg KOH/g (ASTM D2896) | 10.20 | |
Viscosity @ 100ºC, cSt (ASTM D445) | 12.5 to <16.3 | 14.52 |
Viscosity @40ºC, cSt (ASTM D445) | 110.23 | |
Viscosity Index (ASTM D2270) | 135 | |
Viscosity @-20ºC mPa s (cP) (ASTM D5293) | 7,000 Max | 5,824 |
Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800) | 13 Max -c | 11 |
ELEMENTAL ANALYSIS (click for test details) - a, b | ||
Additives | ||
Calcium, ppm | 1,404 | |
Magnesium, ppm | 722 | |
Phosphorus, ppm | 1,200 Max | 779 |
Zinc, ppm | 817 | |
Molybdenum, ppm | <1 | |
Barium, ppm | <1 | |
Boron, ppm | 103 | |
Silicon, ppm | 6 | |
Potassium, ppm | <5 |
PHYSICAL TESTS (click test for details) | Standard | Chevron Delo 400LE |
TBN, mg KOH/g, (ASTM D2896) | 8.86 | |
Viscosity @ 100ºC, cSt, (ASTM D445) | 12.5 to 16.3 | 15.33 |
Viscosity @ 40ºC, cSt, ASTM D445 | 124.26 | |
Viscosity Index (ASTM D2270) | 128 | |
Viscosity @ -20ºC mPa s (cP) (ASTM D5293) | 7,000 Max | 6,373 |
Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800) | 13 Max -c | 12.5 |
ELEMENTAL ANALYSIS-b | ||
Additives | ||
Calcium | 1,521 | |
Magnesium | 384 | |
Phosphorus, ppm | 1,250 | 1,157 |
Zinc, ppm | 1,273 | |
Molybdenum, ppm | 92 | |
Barium, ppm | <1 | |
Boron, ppm | 557 | |
Silicon, ppm | 6 | |
Potassium, ppm | <5 | |
Manganese, ppm | <1 |
I'm so bored at work today.. there is quite a bit of difference between se and sde .. the older version, se has a bit of moly in it. But there is a lot of differences, when your talking parts per million it may be small.Or just trying to keep the longest oil thread going...