Chinese mounting bar on ST?

I remember the handlebars were cast aluminum and not round, so how would that attach? The picture you show has round (cross section) handlebars - is that some kind of aftermarket bar setup?

Your link took me to Ali express's home page with female sport leggings.
 
The ST1100's handlebars are round steel.

The link worked fine for me. Maybe a cardboard dummy using what measurements are given would provide proof of concept.
 
@SMSW, the image above is from the product ad and it shows a different bike. There are 'variations' of this product labeled for various Hondas, KTMs etc. No ST1100/ST1300 though.

If the link doesn't work, then doing a search on Aliexpress with the terms "motorcycle navigation bracket mounting extension" or something similar should start bringing up alternatives. The product variety is a virtual rabbit hole to fall into, there are so many alternatives.

A cardboard dummy could be a very good idea, and easy, as many of these holders show the critical dimensions.
 
Hound said:
The ST1100's handlebars are round steel.

The link worked fine for me. Maybe a cardboard dummy using what measurements are given would provide proof of concept.
Click to expand...
Oops, sorry, maybe I should open my eyes before I reply. Thanks. I did try the link three times and then did a search but did not find that particular item on Ali. Just did it again and I got Ali's opening page with "Sorry the page you requested cannot be found".

@raomerb - I liked the aluminum bracket with RAM balls that sat atop the dash. My 1300 came without one, but after seeing a picture of that here I made one out of a piece of aluminum and 3 RAM balls. I mounted my GPS and RAM X-phone holder on that. You can also get covers for the brake reservoir and clutch reservoir w/ RAM balls - again for the 1300. Might these sorts of things work on an 1100?
 
Plastic cover is not needed. Must be removed with heli bars. As long as the handle bar is straight on each side of the riser it might work but there are better ways to mount stuff.
 
You must log in or register to reply here.
Back
Top Bottom