H4 (9003 in North America) is the closest automotive lamp with a base that will fit the ST1300- but not quite. So that they will seat properly in your headlamp reflector you will have to cut off the bottom two alignment tabs to install them. After doing this very simple modification they will sit properly in your reflector. F2 is an LED bulb made using the same base as a H4. It is manufctured by a company called Evitek but marketed under several different names.
There are three Amazon links in the first post of this thread- H4 LED - 2018 Evitek, F2 replaces G6 Anyone of these is the F2 LED bulb made by Evitek that you are looking for. Even if you do not purchase using these links you will have the information that you need to find them.
For the position lights I installed part number WLED-CWHP15-TAC bulbs from SuperBrightLeds.com because they matched the light colour emitted by the G6 LED headlamp bulbs very well. The colour of the F2 is very similar to the G6 so they should be a good match as well.
This was based on the recommendation found here- I replaced my marker lights with this led from www.superbrightleds.com WLED-CWHP15-TAC.
Update... at the end of 2019, my right side LED's fan started screaming. It is annoying as hell. As I hit 35mph it starts gurgling. It looks like I will have to replace both lamps due to the lack of being able to replace just the fan.
The lamps still work just as well as they did the first time I lit them up. That's the part that ticks me off.
I have no idea about what is the best purchase option now-a-days. If the light is otherwise functioning normally I would attempt trying to get some lubrication in to the fan motor shaft bushing/bearing area before I gave up on them and bought new. Nothing to loose at this point.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.