- Joined
- Aug 19, 2018
- Messages
- 87
- Location
- Columbia, SC
- Bike
- 2005 St1300A
- 2024 Miles
- 003164
- STOC #
- 8990
I have a 2005 St1300 with leaking fork seal. About how much to replace, parts and labor?
The referenced write up. I followed this to the letter. It was messy and took a little time, but was not that difficult.(see Michael's write up)
If you want an improvement from factory, without spending a lot of money, I would suggest sonic 1.1 springs, 130 mm schedule 40 PVC spacers, and 7 weight oil 125 mm from the top when compressed.Thanks Larry and Eric. I am somewhat mechamically proficient and do most of my own work on the standard stuff. I've never done forks before and am a little intimidated. Don't want to screw it up and then have to get it redone. I'll read through the instructions and see if I feel up to it or not. Would you recommend Progressive fork springs while it's already apart?