Anyone have advice on how to clean my ST’s old dirty exhaust pipes, especially the lower foreword parts that are tarnished and have road grime all over them.
Exhaust grunge
- Thread starter seanners
- Start date
- Joined
- Jun 21, 2011
- Messages
- 1,116
- Age
- 71
- Location
- Ada ( Grand Rapids ) Michigan
- Bike
- '07 ST 1300 & '91 GW
- STOC #
- 8421
"Bar Keeper's Friend " - "Cleanser" , was recommended on ST Owner's here , not long ago . I would rub on it , the length-wise direction for the best appearance later .
Last edited:
Andrew Shadow
Site Supporter
OP
OP
Thanks! Grandpa was an actual bar keeper and he swore by it, swore a lot actually!
CYYJ
Michael
I have not tried using Bar Keeper's Friend, although I expect it would work well because it is a very fine polish.
In the past, I have removed the pipes from the motorcycle and then polished them using a rotary polisher with a foam pad and Meguire's swirl mark remover, which is also a very fine polish.
Michael
In the past, I have removed the pipes from the motorcycle and then polished them using a rotary polisher with a foam pad and Meguire's swirl mark remover, which is also a very fine polish.
Michael
- Joined
- Jan 18, 2021
- Messages
- 387
- Bike
- 2007 ST1300
I removed & cleaned my pipes a few days ago while I have the wheels removed.
Bar Keepers Friend worked well!
I did have to apply a bit of elbow grease, but I’m impressed!
Bar Keepers Friend worked well!
I did have to apply a bit of elbow grease, but I’m impressed!