I’m curious if anyone has this HBH tank bra and can provide feedback on the quality.
https://hondapolice.com/shop/bra-tank-for-motorcycles/
https://hondapolice.com/shop/bra-tank-for-motorcycles/
HBH Tank Bra
- Thread starter Lodi
- Start date
Did you end up buying this bra? All I can find are bras with Pan European written on them.
I would say the material is okay. It is not real leather at all. I believe industrial leather. I have both bra and the seat at the same time i bought used former police.
- Joined
- Sep 16, 2018
- Messages
- 408
- Location
- Northern Baltimore suburbs
- Bike
- ST-1300A '09/'12
- 2024 Miles
- 000298
I'm curious. Any wearing out of the paint underneath due to rubbing?
Is there any place where to buy this front engine guards?I would say the material is okay. It is not real leather at all. I believe industrial leather. I have both bra and the seat at the same time i bought used former police.
Im not sure because mine was repainted so I don’t know that could affect on original paint. I would say leave it without bra and apply 3 pieces of tank pads.
Ebay maybe
- Joined
- Sep 16, 2018
- Messages
- 408
- Location
- Northern Baltimore suburbs
- Bike
- ST-1300A '09/'12
- 2024 Miles
- 000298
T-Rex Racing 2002 - 2013 Honda ST1300 / ABS Engine Guard Crash Cages - Police Bike
T-Rex Racing 2002 - 2013 Honda ST1300 / ABS Engine Guard Crash Cages - Police Bike
www.t-rex-racing.com
- Joined
- Sep 16, 2018
- Messages
- 408
- Location
- Northern Baltimore suburbs
- Bike
- ST-1300A '09/'12
- 2024 Miles
- 000298
Yeah, that's what I have now. I was just wondering.
Andrew Shadow
Site Supporter
Have a look at the below;
T-Rex Racing 2002 - 2013 Honda ST1300 / ABS Engine Guard Crash Cages - Police Bike
T-Rex Racing 2002 - 2013 Honda ST1300 / ABS Engine Guard Crash Cages - Police Bike
www.t-rex-racing.com
Can this engine guard be installed in a civilian model, or only on police models?Have a look at the below;
T-Rex Racing 2002 - 2013 Honda ST1300 / ABS Engine Guard Crash Cages - Police Bike
T-Rex Racing 2002 - 2013 Honda ST1300 / ABS Engine Guard Crash Cages - Police Bikewww.t-rex-racing.com
- Joined
- Sep 16, 2018
- Messages
- 408
- Location
- Northern Baltimore suburbs
- Bike
- ST-1300A '09/'12
- 2024 Miles
- 000298
It should work on both. As far as I can see there is no difference in the fairings of a police version vs the civillian. Either will probably require some modificafion. The stock engine guards are different on the police vesrion in that they have mount points for sirens etc. It appears that these guards bolt directly to the engine mounts so that shouldn't be an issue.
Of course I don't own these mounts nor have I ever installed them so take this with a grain of salt.
- Joined
- Oct 26, 2020
- Messages
- 1,751
- Location
- Makefield Highlands PA
- Bike
- 2016 ST1300P
- 2024 Miles
- 003726
It will work on both.
Will work on civilian rides, will need a hole in front of the tip over bars cover, and one thru the black grill in front of the cylinder head cover, you can see the hole in fairing here
Andrew Shadow
Site Supporter