Both links only go to: https://www.superoffers.com/
Lumina 14 cu ft trailer
- Thread starter rjs987
- Start date
Andrew Shadow
Site Supporter
Something on your end I suspect. When I click on the links they both go to Amazon.com, one for the lights and one for the strobe module.
I see a quick redirect.viglink.com and then it goes where I said.
OP
OP
- Joined
- Sep 25, 2009
- Messages
- 1,012
- Age
- 71
- Location
- West Des Moines, IA
- Bike
- 2024 Kaw Vulcan S
- 2026 Miles
- 003996
Don't know how that happened. Hacked links?
Fixed them with corrected link addresses in that post.
When I returned to my post where I put those links to test them I noticed the logo on my webpage tab changed from the ST logo to the Super offers logo as if it is an intermittent web link hack. @Mellow ?
tnbill
Site Supporter
Safari on Iphone sends me to superoffers but windows sends me to amazon. My guess it is an issue with safari.
OP
OP
- Joined
- Sep 25, 2009
- Messages
- 1,012
- Age
- 71
- Location
- West Des Moines, IA
- Bike
- 2024 Kaw Vulcan S
- 2026 Miles
- 003996
Not just Safari. When Larry posted the issue I checked and ended up at super offers also. And I use a Chromebook using Chrome to get to the Internet. But it wasn't consistent. I haven't had that specific issue since I changed the links but I do still have an occasional issue when getting to the intended product on Amazon and sometimes end up at the Amazon home page instead of the specific item.
OP
OP
- Joined
- Sep 25, 2009
- Messages
- 1,012
- Age
- 71
- Location
- West Des Moines, IA
- Bike
- 2024 Kaw Vulcan S
- 2026 Miles
- 003996
The steel for the towball adapter to bolt onto my hitch is now at the welding shop. I don't have the equipment to weld stainless steel so I have the shop do that for me. They say it should be done tomorrow.
I am using what I have left over from the hitch I made for the AK 550. The end plate is just the right size to make most of the adapter. I am adding a 5/16 thick plate on top to mount the towball.
Here is the diagram I gave them to follow (not to scale but the important details are there). At the top is the flat plate that has the corners cut off. The other 3 diagrams are the welded/formed result. This plate will bolt onto the end of my existing hitch that is now on the Vulcan S.
I am using what I have left over from the hitch I made for the AK 550. The end plate is just the right size to make most of the adapter. I am adding a 5/16 thick plate on top to mount the towball.
Here is the diagram I gave them to follow (not to scale but the important details are there). At the top is the flat plate that has the corners cut off. The other 3 diagrams are the welded/formed result. This plate will bolt onto the end of my existing hitch that is now on the Vulcan S.