Nearly got my $'s worth out of this Metzler

[Britman]

7,500 miles

 

[Byron]

You're not pulling it yet, there is still some tread showing? :crackup

 

[Britman]

You're not pulling it yet, there is still some tread showing? :crackup

By the time I got to the tire guy there was a thin sliver of no rubber showing around the center.

 

[motomac]

This is getting your moneys worth out of a Metzler!!!!!!

 

[jahoobob]

This is getting your moneys worth out of a Metzler!!!!!!

Been there, done that!

 

[motomac]

The biggest problem I had with that Metz was there are no wear bars in the tread area right out of the box. So you have rubber one mile and the next you have steel showing.

 

[forgitaboutut]

The biggest problem I had with that Metz was there are no wear bars in the tread area right out of the box. So you have rubber one mile and the next you have steel showing.

that's why I may never use metz until they come up with a way to tell just how much is left!

 

[MidLife]

that's why I may never use metz until they come up with a way to tell just how much is left!

This is the Z6, right?

 

[ST Dan]

This is the Z6, right?

yup...same thing happened to me...had rubber on it one day, looked at it the next day and the cords were showing!!!!

 

[dduelin]

There are wear bars on the sides but you have to be able to guage the center wear by looking closely at the tire and taking into account the amount it is squared off from a round profile. If you don't you get surprised with the Z6.