John OoSTerhuis
Life Is Good!
Nice job, Paul and Jim! Saved this one to my archives.
Regards, John
Regards, John
Murph Kits has what you need. Give him a shout.RANGER362; said:Does anyone know if the solenoid / valve parts are available new?
Coiled hose dose not hold very much volume. Ten feet of hose is only a fraction of what a home made 2" of 3" canister holds.Holding the ?accel? button down, the CC brought the bike to an indicated 95mph but would go no further due to a lack of vacuum volume. Still, not bad for only coiled hose as the main volume. I guess there is about 3-4 ft rolled up under the airbox.
The complex part of the Rostra will be getting the speed information for the servo. The control switch is the same as the Audiovox. You do away with the vacuum lines. You replace the Audiovox harness with the Rostra. You can use the same mechanical connection to the throttle body on the Vanagon. What were you using to get the speed sensor info? The coil wire or the ECM?Plan B is probably a Rosta, spendy, and complex to figure out what kits to order.