PAIR system removal

I'm neither smart nor patient enough. While not a fan, "back in the old days" we often used DynoJet/Bazzaz piggyback fuel tuners. Is there not one available for the ST1300? I imagine the demand for performance ST1300 fuel tuning is not high enough for someone to crack the ECU, assuming it's possible.

edit: There are times when I should shut my fingers up, and do some research before answering ;)

[/URL]
I think Bazzaz is out of business now.

That's definitely worth checking out, doesn't seem to unreasonably priced.
 
I think Bazzaz is out of business now.

That's definitely worth checking out, doesn't seem to unreasonably priced.
Yes, I believe they are. There are still NOS units I see occasionally. I used to sell them many years ago, and I preferred them over the more common Power Commanders.

I have no direct experience with Woolich, but they come highly recommended by tuner colleagues who are much more knowledgeable than me and most YT mechanics, lol.
 
Yes, I believe they are. There are still NOS units I see occasionally. I used to sell them many years ago, and I preferred them over the more common Power Commanders.

I have no direct experience with Woolich, but they come highly recommended by tuner colleagues who are much more knowledgeable than me and most YT mechanics, lol.
I may try one, although it might be a next year project at this point. I feel like Honda left a lot of power on the table with these engines.
 
Would it be possible with this set-up, to re-flash a newer ECU to work on an '02-'07 ST? Just thinking outloud here. That might be a potential solution for a code 26 or 25 that so many ST owners have.
Gator
 
Would it be possible with this set-up, to re-flash a newer ECU to work on an '02-'07 ST? Just thinking outloud here. That might be a potential solution for a code 26 or 25 that so many ST owners have.
Gator
I don't think that you will easily find someone who can/is willing to re-flah the ST1300 ECM.
 
I've wondered about the differences between the 06 and the later models. I had an 06 and an 09. The two engines are definitely tuned differently - based on only on personal comparison of one each of those two models. More lower rev grunt is available on the 09 and it sounds a little more raucus. The 06 engine used to pink lightly when hot, when climbing into thinner air and when accelerating hard. The 06 needed clutch slip to get round the really tight uphill hairpins that we have in some places in the UK, otherwise it would risk stalling. The 09 just drives round the same bends, picking up the power easily.

I thought at the time that this behaviour might have been to do with the CTX1300 experiment which has the 'same' engine. Except it doesn't. It just looks the same. The CTX crankshaft has a different part number from the ST1300 which to me suggests that the 'timing' of the pistons is different. The cam shaft too, is different between the CTX and ST1300 (I can't rememebr which model I had when I did this comparison. I think it was the A6.

If you take a look at the fiches of those key parts for the engine, and they turn out to be the same - I could easily draw the conclusion that it is only the engine management that is different. But if I had an A6 still and I wanted to experiment and place the £1000 bet on buying an A9 ECU assuming that it would work - I don't think that I'd do it.

Of course, there may be other things that the A9 ECU does with other electrics - and one of them may have been to change when it detect engine knock. I don't know.

And of course, if you have HISS on your models, then you cannot just insert a new ECU - you need new keys to go with it.
 
Back
Top Bottom