I have a leaky left fork seal, so just gonna replace seals on both.
I am currently at 24k miles and I am wondering if I need to replace anything besides the Fork Seal Set:
(Ron Ayers fiche) - http://fiche.ronayers.com/Index.cfm/Module/Main/TypeID/26/Type/Motorcycle/MakeID/1/Make/Honda/YearID/46/Year/2005/ModelID/5520/Model/ST1300/GroupID/219488/Group/FRONT_FORK
#19 51490-MCA-003 SEAL SET, FR. FORK
This is my daily rider so I would prefer to spend a few extra bucks and pick up anything I will probably need rather than having to wait another week to get additional parts.
What fork oil do you recommend? If it matters, I live in Houston suburbs and do a mix of highway & side street driving.
How big a job is this? From looking at the manual and the bike, I get the impression that all I am going to need to do is remove the front wheel and fender, the loosen the fork clamps and pull them down and out... is it really just that simple?
I am currently at 24k miles and I am wondering if I need to replace anything besides the Fork Seal Set:
(Ron Ayers fiche) - http://fiche.ronayers.com/Index.cfm/Module/Main/TypeID/26/Type/Motorcycle/MakeID/1/Make/Honda/YearID/46/Year/2005/ModelID/5520/Model/ST1300/GroupID/219488/Group/FRONT_FORK
#19 51490-MCA-003 SEAL SET, FR. FORK
This is my daily rider so I would prefer to spend a few extra bucks and pick up anything I will probably need rather than having to wait another week to get additional parts.
What fork oil do you recommend? If it matters, I live in Houston suburbs and do a mix of highway & side street driving.
How big a job is this? From looking at the manual and the bike, I get the impression that all I am going to need to do is remove the front wheel and fender, the loosen the fork clamps and pull them down and out... is it really just that simple?