Sumitomo HTR Z II Anyone tried these?

Joined
Sep 24, 2007
Messages
1,346
Location
Gainesville, Florida
Bike
ST1300A, TracerGT
I saw these tires and thought they might be great on the ST and almost look like an MC tire, too! Looks like it is slightly narrower than the Hankook, too.

CLICKY
 
That looks cool Golfer. Be the first on your block! The price is right too!
 
The price sure is right, only thing I don't like is the squared off edge. The Hankook has a nice taper from tread to sidewall for cornering.
 
The price sure is right, only thing I don't like is the squared off edge. The Hankook has a nice taper from tread to sidewall for cornering.

I like having the rain grooves go all the way to the edge and I expect it would be a bit rounder when mounted on a 5" rim.
 
Tread Width spec for this tire is listed at 7.2" whereas the spec on the commonly used Hankook Ventus V12 is 6.8" so I'm not sure if it will fit although to muddy the waters further the section width of the Sumitomo tire is slightly smaller at 8.3" versus 8.4" on the kook.

Go ahead Bill, we need more pioneers...
 
After talking with a tire dealer friend of mine, the tread width is important for it to fit. The section width will pull in more when fitted on a smaller rim, but the tread width won't. I think it would be too wide to fit.
 
After talking with a tire dealer friend of mine, the tread width is important for it to fit. The section width will pull in more when fitted on a smaller rim, but the tread width won't. I think it would be too wide to fit.

Aw, c'mon Bill. Give it a whirl. If this Michelin fit on mine anything will fit.
 
Back
Top Bottom