TB Sync and vacuum hoses

pumper316

pumper316

SaTx Speed Demon!
Joined
Feb 22, 2017
Messages
121
Location
San Antonio, TX
Bike
'04 ST1300A
Planning to do a TB sync over the weekend and want to replace all the vacuum hoses on the 5 way tee. Can I increase the length of the vacuum hoses so I can route the tee to the top of the TB?

Thanks.
 
I believe I saw the great ST Wisperer did exactly that, hopefully he will speak here soon.

Sent from my SAMSUNG-SM-G935A using Tapatalk
 
I would not make them more than a quarter inch longer or you will create a kichen sink trap.
Make them just a little longer than they are so the vapors go back down into the TB and out of the lines.
 
Last edited:
Igofar said:
I would not make from them more than a quarter inch longer or you will create a kichen sink trap.
Make them just a little longer than they are so the vapors go back down into the TB and out of the lines.
Click to expand...
Would kmow/tell us the hose ID size?

I'm hoping to have the replacement hose before I do the changeover so I'm wondering the inside diameter and the length
 
Last edited:
Sorry to hop on here but I have searched and not found the proper how to do the TB sync on a 1300. Is there one out there written or simple deal?
 
Dave.David said:
Would kmow/tell us the hose ID size?

I'm hoping to have the replacement hose before I do the changeover so I'm wondering the inside diameter and the length
Click to expand...

Picked up 5/32 vacuum hose from Advance Auto Parts. I'll cut the new hoses down to size based on the length of the old hoses I just disconnected.
 
I done my 07 2 or 3 years ago . I ran the hoses out front for easy access. Search my name under leaks. Tdinova

Sent from my SGH-M919V using Tapatalk
 
You must log in or register to reply here.
Back
Top Bottom