- Joined
- Mar 18, 2006
- Messages
- 2,851
- Age
- 70
- Location
- Ilkley, W Yorkshire, UK
- Bike
- 2013 ST1300 A9
- 2024 Miles
- 000679
- STOC #
- 2570
The one that I am referring to is from an ST1300, but I believe that the same type of connector is used on some 1100s.
You will have heard of the ones that I mean. A single connector is used to join together all of the earth (green) wires in one single plastic connector. Another is used for connecting the power feeds (black/white wires) for devices such as injectors, relays, coils, .......
Question - how is the connection inside the block actually made ?
You will have heard of the ones that I mean. A single connector is used to join together all of the earth (green) wires in one single plastic connector. Another is used for connecting the power feeds (black/white wires) for devices such as injectors, relays, coils, .......
Question - how is the connection inside the block actually made ?
- Are all of the terminals already connected on a bus-bar
- Or are the terminals single units which are connected by a busbar in the lid once the top part is in place.
- Or some other method.
Last edited: