From the previous USB chargers I had I am sure that this one has the same setup as the rest.. One port is 2.1a and the other 1.0a. So yeah you can charge an iPad or tablet on the one port easily.
edit: according to this description it's a dual 2.1a USB plug. That would be cool!
http://m.dx.com/p/DetailMore?sku=312937&tabIndex=1
but for most electrical devices, the output of the device given is the TOTAL output, not individual port outlets
Possibly using the quartet harness on the lower left side. Check this thread for information : Pinout
Yep, you were right. I ended up sending an email to the previous owner who said that when he installed the 12v plug and the garmin and the heated grip warmers that they are attached to the Honda Quartet plug.
Well that solves that mystery! Now, is there an easy wire I can use to get "switched" power from towards the battery that I can use for my USB plugs? Thanks!
Yep, you were right. I ended up sending an email to the previous owner who said that when he installed the 12v plug and the garmin and the heated grip warmers that they are attached to the Honda Quartet plug.
Well that solves that mystery! Now, is there an easy wire I can use to get "switched" power from towards the battery that I can use for my USB plugs? Thanks!
I have a Givi top box and was thinking about mounting a USB in it. Can you describe about where in the box you mounted yours? Also, I assume you leave the top box on as permanent, or do you have some sort of disconnect for the wiring?I mounted these in my top box on STA5 and ST10
http://www.amazon.com/Kuryakyn-USB-...8&qid=1427763381&sr=1-1&keywords=kuryakyn+usb
Here's what I did last weekend..
https://www.st-owners.com/forums/th...lots-of-pics-opinions-thoughts-wanted.168223/
If you look at the Givi box, there might be a small circle on the bottom intended for the Givi power plate. I drilled out that hole, drilled out the corresponding spot on the Givi mounting plate (since mine was an actual GIVI plate, there was already a circle outlined that married up to where I needed to drill), and then found a way to put a plug there.
I used an SAE Luggage Electrix kit from powerlet and I use SAE adaptors for whatever I want. I have SAE to cigarette adaptor and throw a USB in that cigarette adaptor to charge an ipad or something like that. THat's my most likely scenario. But I see no reason why you couldn't get one of those USB plugs meant for a motorcycle dashboard and put that down there.
Because I use the SAE luggage kit, the bag is completely removeable and if you want to secure the plug in the location I decided to put it, I'd suggest securing it to the bike so that the bottom of the Givi case is flat which makes bringing it inside and packing it easier.
Alexi
How about something like this? .
http://www.amazon.com/Charger-Voltm...=8-3&keywords=dual+usb+charger+and+volt+meter