I recently tried to replace the rear brake pads on my 2007 ST1300. I found the pads to be too thick. I had ordered genuine Honda PT# 06435-MCS-G02. When I looked at them they seem to be thicker than the last set I had installed.
I found that with the stationary pad installed there was no room for the disc to fit in the slot.
I have measured the thickness of the pad and it is very close to 7/16" or .425"
If anyone has a new set of Honda pads on the shelf could you please measure the thickness.
Thanks in advance
I found that with the stationary pad installed there was no room for the disc to fit in the slot.
I have measured the thickness of the pad and it is very close to 7/16" or .425"
If anyone has a new set of Honda pads on the shelf could you please measure the thickness.
Thanks in advance