How thick is the meat on the pad? Not the whole pad just the part that wears away.
I bought some after market pads and they look too thick
I bought some after market pads and they look too thick
How thick is the meat on the pad? Not the whole pad just the part that wears away.
I bought some after market pads and they look too thick
That's interesting BB. Just for grins I decided to check the second package and both of those pads also measured roughly 4.08mm also. I'm measuring the total thickness of the friction material including the "wear bar" portion which does seem to be about 0.5mm thick. So maybe that explains the difference between our measurements.I measured my new 06455-MCS-G02 front brake pads in late December before I installed them--I bought the pads a couple years ago and had them on the shelf. Every one of the 4 pads had 3.5mm of friction material on them. Interesting that yours had more Scooter.
That would be THREE times RonSorry I replied to the wrong thread TWICE.
RON
Just an update since my new rear pads just arrived. Superceded by part number 06435-MCS-G03, measure about 5.4mm thick, with maybe .05mm variance between the two.For future reference, the rear pads, Honda part # 06435-MCS-G02 measures 5.25mm and 5.20mm of friction material for both pads respectively.