- Joined
- May 6, 2008
- Messages
- 6,186
- Age
- 66
- Location
- Lompoc, California
- Bike
- 07 & 12 ST1300A
- SPOT
- LINK
- STOC #
- 8057
The reason I ask is I had an ABS problem with my ST1300 and the service manual says that the codes will not go away by themself, running the codes is pretty simple just pull the two 30amp fuses and then turn the key on and reinstall one of the fuses when the ABS light goes out and then count the number of flashes. To reset the ABS problem just reinstall the second fuse. I had worked past the one that says you have a bad battery or charging issue.I didn't. I have spent the time collecting parts and taking the bike apart for the alternator.
Also, there were several things online about charging issues correlating to ABS warnings lights. This included the St1100, but I didn't find anything on the 1300. I thought I'd wait and see.