When I swapped the engine I plugged everything in and tested. All the lights, horn and indicators worked.
It was then only when putting the rest of the bike back together I noticed I forgot to put the last engine mount on.
It was then a week later after rebuilding the brakes and replacing the front brake light switch I noticed no brake lights. And then no indicators.
It hadent twigged I could have pinched it as forgot I fitted the bracket after I tested it all.
So it was only when using the multi meter and confirming the green and white wire was the issue and I started to follow the loom I found it trapped.
It was then only when putting the rest of the bike back together I noticed I forgot to put the last engine mount on.
It was then a week later after rebuilding the brakes and replacing the front brake light switch I noticed no brake lights. And then no indicators.
It hadent twigged I could have pinched it as forgot I fitted the bracket after I tested it all.
So it was only when using the multi meter and confirming the green and white wire was the issue and I started to follow the loom I found it trapped.