Smudgemo
Intermodal Man of Mystery
Lately I have been getting my parts from this outfit: http://www.adeptpowersports.com/oem-parts/1996-honda-abs-ii-st1100a.html
Just change it to your year in case any of it is different. I think everyone just orders the special parts from Honda or inventory would be nuts.
When I do bulk hose, I just go to the local dealer for the length/type needed. The cooling system has one line that goes from under the carbs to the thermostat housing that you normally can't buy to length mail-order, and one of the fuel elbows I replaced recently was no longer available (or at least not at that time) so I bought a piece of bulk line. Honda automotive blue coolant is available at the local dealers and is cheaper than the green moto stuff.
Just a note that you'll need to loosen bolt #14 when you replace the #9 o-rings in that large "water cover" and the bulk line is #13: http://www.adeptpowersports.com/oem-parts/1996-honda-abs-ii-st1100a-water-pipe-96-98-assembly.html It's mentioned in the tech section at least a few times.
Just change it to your year in case any of it is different. I think everyone just orders the special parts from Honda or inventory would be nuts.
When I do bulk hose, I just go to the local dealer for the length/type needed. The cooling system has one line that goes from under the carbs to the thermostat housing that you normally can't buy to length mail-order, and one of the fuel elbows I replaced recently was no longer available (or at least not at that time) so I bought a piece of bulk line. Honda automotive blue coolant is available at the local dealers and is cheaper than the green moto stuff.
Just a note that you'll need to loosen bolt #14 when you replace the #9 o-rings in that large "water cover" and the bulk line is #13: http://www.adeptpowersports.com/oem-parts/1996-honda-abs-ii-st1100a-water-pipe-96-98-assembly.html It's mentioned in the tech section at least a few times.