Fairing/Cowl retaining clips

Willsmotorcycle

Willsmotorcycle

Ride more...
Site Supporter
Joined
Oct 26, 2020
Messages
1,770
Location
Makefield Highlands PA
Bike
2016 ST1300P
2024 Miles
003902
Found these while trying not to pay $4 a piece. Apparently they make them for Honda and Acura and others. Only found the large size for the dash top so far, fit like a glove.

store.ilantee.com

50 Pcs Front Bumper Cover Retainer Clips for Honda Acura 90657-SB0-003

Fastener Type: Front Bumper Cover Push-Type Retainer Dimension: Head Diameter: 11mm, Stem Length: 10mm Fits into 8mm Hole Car Fitment: Acura Legend, Honda Accord & Odyssey 1991 - On What You Get: 50 Pieces Black Car Clips Replace for 90657-SB0-003
store.ilantee.com store.ilantee.com
 
SMSW said:
Check out these places: (The last is a link to another thread w/ some sources). I've not used these recently, but I assume all of the websites/URL's work.
http://www.boltmotorcyclehardware.com/

http://www.hondadirectline.com/index.htm

http://wingstuff.com/products/1551-standard-or-low-profile-fairing-plastic-rivets?from_search=1

https://www.st-owners.com/forums/threads/plastic-clip-rivets-dohickies.60355/
Click to expand...
Awesome saw a few of those when this thread was moved to the right spot and I went looking for the givi lock cylinder. This place is awesome!!
 
No joy with the hondadirectline link, here or the other thread mentioned.
All the hdl links give me 404 error.
The GoldWing link works, though, for the 10-pack @ $7.
I would spring for that 50-pack, if I could find it.
Will try again later...
Still an improvement, over the $4 / each, by far!
 
Sadlsor said:
No joy with the hondadirectline link, here or the other thread mentioned.
All the hdl links give me 404 error.
The GoldWing link works, though, for the 10-pack @ $7.
I would spring for that 50-pack, if I could find it.
Will try again later...
Still an improvement, over the $4 / each, by far!
Click to expand...
Thanks. I copied those links a few years ago to my ST Maint file, and have not used them since. I copied all four with a few keystrokes for this thread. I've found that old URL's often do not work, they seem to spoil like old food left in a refrigerator. I should have checked them before posting.
 
I just bought these recently and they work fine. Almost as nice as the Honda fasteners at a fraction of the cost.

www.ebay.com

6mm Hole Dia Plastic Push In Rivets Fastener Pin Clips ATV For Honda Kawasaki | eBay

Type: ATV Motorcycle Body Clip Fender Rivet. Fits For Kawasaki Ninja. Fits For Honda CBR. Material: Plastic. With a high rate. Fits For Polaris For H-D For Indian. Fits For Norton For Triumphand. Fits For Suzuki Bandit Hayabusa.
www.ebay.com
 
And less than 7 cents per.
At Wingstuff, I got 10 for 80 cents each. Until they added $10 s/h. Even so, $1.80 beats $4 - 6 each, all day every day.
 
Willsmotorcycle said:
Found these while trying not to pay $4 a piece. Apparently they make them for Honda and Acura and others. Only found the large size for the dash top so far, fit like a glove.

store.ilantee.com

50 Pcs Front Bumper Cover Retainer Clips for Honda Acura 90657-SB0-003

Fastener Type: Front Bumper Cover Push-Type Retainer Dimension: Head Diameter: 11mm, Stem Length: 10mm Fits into 8mm Hole Car Fitment: Acura Legend, Honda Accord & Odyssey 1991 - On What You Get: 50 Pieces Black Car Clips Replace for 90657-SB0-003
store.ilantee.com store.ilantee.com
Click to expand...
I know this is an old thread, but check this out for $10.00 more...


I started looking around because I discovered that Harbor Freight now sells a collection of various sizes, but they are mostly too large for ST1300 applications.
 
You must log in or register to reply here.
Back
Top Bottom