I'm looking to buy a Givi 56L case, the Amazon ad shows it being almost 19 5/8X19 5/8X24 5/8 inches in size, my question is, is it really that big, or are they using the shipping box size? Can anyone post a pic on a ST 1300
I have the Maxia dimensions 23" wide 16" depth 12" height. 2004 will have all the plastics and mount back on Thursday and if you would like a pic just let me know and will postI'm looking to buy a Givi 56L case, the Amazon ad shows it being almost 19 5/8X19 5/8X24 5/8 inches in size, my question is, is it really that big, or are they using the shipping box size? Can anyone post a pic on a ST 1300
How did you wire the lights? I've got the Givi E215 Monokey plate on my ST, installed by a previous owner, but it has no place for the electric contacts in the lighting kit. I could MacGyver it with some JB weld, but I'm curious if there's an easier neater solution. TIA
Post a picture of what's coming out of your top box now, it will be easier for solutions.How did you wire the lights? I've got the Givi E215 Monokey plate on my ST, installed by a previous owner, but it has no place for the electric contacts in the lighting kit. I could MacGyver it with some JB weld, but I'm curious if there's an easier neater solution. TIA
I don't have the top case yet, I'm planning the install. I intend to get the V56 case that STrider shows installed, that's why I quoted his post.Post a picture of what's coming out of your top box now, it will be easier for solutions.
@JohnK I may find myself following your path at some point. I think the weak link in my setup is the lid to base connection as opposed to the base to plate connection. Running a wire across the hinge inside should not be a big deal.I had the contact set up but after a year of on and off with the trunk - it started to mis align and the lights didn’t come on. Then I hard wired them to my brake light that has a flasher so it adds to the rear view when I’m braking - I like the v shape as it’s uncommon so peeps pay attention more. I also added leds to the trunk red lens wrap around - hard wired and tacked down the wires with a glue gun. The wire ends have a connector to remove the set up