Hi everyone. Bought Healtech Brake light pro BLP what is brake light modulator/flasher. has anyone got one? Don’t know how to attach it to my ST1300, requesting some advice. It’s designed to be attached to 2 wires (brake light and ground). Under the fender I have 6 wires. My quick idea was to tap left side green/yellow brake light wire and black ground. Healtech said I can’t tap in just one side. Healtech said it‘s important to make the connections at the rear light assemble before the junction splits in 6 wires (left, right rear brake bulbs) so both bulbs will be working with the BLP. their manual:
’Anna’sDad’ posted: The brake lamp circuit does use a Green/Yellow conductor, actually the circuit uses four Green/Yellow conductors.
The four Green/Yellow conductors:
For me it means there is no single green/yellow wire I can tap in? What is the recommended solution? This photo is view from under the fender - 6 wires follow to the two rear bulbs.
’Anna’sDad’ posted: The brake lamp circuit does use a Green/Yellow conductor, actually the circuit uses four Green/Yellow conductors.
The four Green/Yellow conductors:
- Front brake lamp switch.
- Rear brake lamp switch.
- Right-side brake lamp.
- Left-side brake lamp.
For me it means there is no single green/yellow wire I can tap in? What is the recommended solution? This photo is view from under the fender - 6 wires follow to the two rear bulbs.
Last edited: