I think I have a leak

OP
OP
cjames431
Joined
Oct 17, 2014
Messages
919
Location
Tacoma, Wa
Bike
2010 ST1300
Not sure what this plastic sleeve is from but I found it while scrounging around the garage. We'll see how long it lasts.PXL_20220509_150138968.jpg
 

Igofar

Site Supporter
Joined
Jan 8, 2011
Messages
7,123
Location
Arizona
Bike
2023 Honda CT125A
Not sure what this plastic sleeve is from but I found it while scrounging around the garage. We'll see how long it lasts.PXL_20220509_150138968.jpg
I also see a nick or damaged area on the left hose at the bottom of the picture above this writing.
As well as at least three points where the hose(s) are laying on, or are going to wear against the metal fasteners they are resting against.
 
OP
OP
cjames431
Joined
Oct 17, 2014
Messages
919
Location
Tacoma, Wa
Bike
2010 ST1300
I also see a nick or damaged area on the left hose at the bottom of the picture above this writing.
As well as at least three points where the hose(s) are laying on, or are going to wear against the metal fasteners they are resting against.
I will keep an eye on it.
 

Igofar

Site Supporter
Joined
Jan 8, 2011
Messages
7,123
Location
Arizona
Bike
2023 Honda CT125A
….and end up doing it another time?
Your frustrated enough, wait for the new gasket.
Have you considered replacing the t-stat housing?
Is it pitted badly, causing leaks?
 
OP
OP
cjames431
Joined
Oct 17, 2014
Messages
919
Location
Tacoma, Wa
Bike
2010 ST1300
….and end up doing it another time?
Your frustrated enough, wait for the new gasket.
Have you considered replacing the t-stat housing?
Is it pitted badly, causing leaks?
I did replace the t-stat and housing. I had a minny geyser at the top of the cover. Ordered the gasket and while trying to place the cover back on the gasket tore. :mad: 2 on order this time.
 
Top Bottom