i connected the relay wire to the switched acc wire on the fuse box, except my fuse box did not fire Up...errr.Right here.
Article [13] - ST1300 - Switched Power Tap | ST1300 Articles
There is a location on the ST1300 that is great for a switched power tap in case you just have a couple things to power or you need a switched tap for your fuse box. Below are the steps to get to the power location: Remove left saddlebag and left side panel to expose the OEM fusebox...www.st-owners.com
then i realized i hadn't installed the fuses in new style eastern beaver wiring harness, after installing the two 30 Amp fuses i confirmed with my volt meter current flow from the unswitched terminals.
So i unceremoniously removed the relay wire from the switched power source and touched it on the battery positive terminal....Nuttin!! I feel like the fellow in the song ?My boomerang won't come back... did i over look the obvious or is my relay hooped?!