increasing
Site Supporter
As I said. At the reflector brackets.Found a picture online that shows what it looks like with extra lights attached to both sides of the front fender. Does anyone have any pictures that can show how nice the lights on the «Engine Guard» have turned out?
Is there anyone here on the forum who has installed extra lights on the left and right "Engine Guard" ST1100 in a similar low position as the original extra lights on the K1600?
Are there reflector brackets on the engine guards? Seems Increasing was pretty specific.As I said. At the reflector brackets.
I just checked out your kit. Very nice. I like that location. I've recently seen a couple of oncoming bikes at a distance with yellow (not amber) lights mounted very low like that. It's a very conspicuous sight. The bike really stands out in the daytime. I expect it would even at night where a bike's lights tend to get lost in a sea of headlights.Yep, I've done just that.
I just checked out your kit. Very nice. I like that location. I've recently seen a couple of oncoming bikes at a distance with yellow (not amber) lights mounted very low like that. It's a very conspicuous sight. The bike really stands out in the daytime. I expect it would even at night where a bike's lights tend to get lost in a sea of headlight
Nope. But the forks/fenders are more or less a similar position, easy to do, and in reference to his photo in post 21.Are there reflector brackets on the engine guards? Seems Increasing was pretty specific.
Are you thinking of aux lights on the engine guard location and under the mirrors?
I really like that blue and gold trim paint!! ABS to boot. Nice bike.These are Honda ST 1100 police light brackets . I'm very happy with them - They are solid stuff , no shaking or vibrations.. Nothing on the bike gets litt up -nice clean light .I've got some Rigid led's on there -one spot and one with a wider beam. I have two bikes so they both got this treatment- one of each .
On the ST, I thought it would look strange at first , but they hardly get noticed. Be aware - some of the under mirror mounts involve - cutting plastic off the mirror housing. I couldn't get myself to do that
If you don't over tighten the locknuts they are easy adjust by hand -on the fly, if you need to.
Good Luck !
![]()