Replacement horn on ST1100-Y (UK Spec)

[J.Murphy]

Thank you - was it this set? https://www.demon-tweeks.com/uk/piaa-slim-profile-two-tone-sports-horns-400-500hz-piaho12/

Yes, they are the ones

 

[panrider]

Hm, I actually, did trim plastic little bit, totally forgot about it

What a fabulous job you have made of that! I can see that I have my work cut out then! It look like you've slightly angled the horn so it is not directly downwards, was that to avoid having to cut more plastic?

 

[Alberto]

avoid having to cut more plastic

I suppose this was the most convenient way to connect the wires sticking out from the other side of the horn.

 

[panrider]

I suppose this was the most convenient way to connect the wires sticking out from the other side of the horn.

I feel that the horn was designed to go on the rh side of the bike!

 

[Alberto]

rh side of the bike!

I second that )

 

[DeanR]

I suppose this was the most convenient way to connect the wires sticking out from the other side of the horn.

Nice job. Dremel cuts? Where were your mounting points?

 

[Alberto]

Dremel cuts

Yep. The lh mounting bracket is standard, the rh bracket was cut from the old cowl subframe, mirrored and welded when I was restoring the bike after the accident. But this bracket could be made from any piece of metal.