I believe the OP said the coolant is coming out of the TUBE, which on his bike is attached to a Zerks fitting (round hole point).
Leaking, is NOT acceptable, Seeping is normal (damp).
If you start the bike and watch the end of the hose, if the drops come out every few seconds, like a heart beat, then you could have a failing waterpump.
However, on such a new bike, I would agree that its probably loose clamps, leaking out the square hole, and running down the side of the hose, appearing that its coming out of the hose.
Clean and dry everything off, and spray some foot powder on the area, then start the bike a watch it, you'll see where its leaking from.
If its the common loose clamps, it could also be leaking along the shelf of the front water pump cover, and exiting the square hole, just spray the entire area and you'll see right away were its leaking.