Uncle Phil
Site Supporter
You probably could find some bushings that would work via Mr. Google so you don't have to fuss with the washers.
Factory Top Case Mounting Spacer Dimensions
- Thread starter Paul W.
- Start date
OP
OP
Do these spacers look correct? And does anyone else have taller spacers like this on the 2 foreword mounting bolts? They sit on the shorter spacers that are used on all 4 mounting bolts. As I mentioned earlier, I assume these taller spacers are there merely for aesthetic purposes—to “level” the box. 
- Joined
- Nov 20, 2005
- Messages
- 823
- Location
- Cedar City, Utah
- Bike
- 12/04/AZ05 ST 1300s
- 2026 Miles
- 000305
I don't think it matters. What that does is change the angle of the topcase. Just make sure your passenger (if you have one) isn't getting the hinged part of the case in their back.
rogo
Site Supporter
[/QUOTE]
The spacers (item1) are there from the factory,With or without top box.
They sit beneath the grab rail.
Spacers (item13) come with the kit. They sit under the metal plate. They are 8mm thick.
OP
OP
Thank you for posting those pics!They are "spacers" to go between the original plastic rack cover and the metal topcase adapter plate. In these pictures, the adapter plate is upside down.
Hope these help.
